Download MFCM-CM_Users_Manual

Cyberex MFCM Configurator/Monitor User's Manual
Updated 07/16/09
Version 1.4.0
Page 2 of 14
TABLE OF CONTENTS
TABLE OF CONTENTS ................................................................................................................................ 2
1.0
Program Description........................................................................................................................... 2
2.0
PC System Requirements.................................................................................................................. 2
3.0
Installation .......................................................................................................................................... 2
4.0
The Initial Login .................................................................................................................................. 2
5.0
PC Comm. Settings............................................................................................................................ 4
6.0
General Comm. Port Usage on the MFCM ........................................................................................ 4
7.0
The Panel Window ............................................................................................................................. 4
8.0
The Main Feed Windows ................................................................................................................... 5
8.1
Changing Settings on the Main Feed Windows ............................................................................. 6
8.2
Resetting Latched Alarms and Warnings ....................................................................................... 7
8.3
Calibrating the MFCM..................................................................................................................... 7
9.0
The System Settings Window ............................................................................................................ 8
10.0
Upgrading/Downgrading the MFCM Firmware............................................................................... 8
11.0
Terminal Window .......................................................................................................................... 11
12.0
Temporarily Closing the PCs Serial Port ...................................................................................... 11
13.0
Creating Service Port Script Files................................................................................................. 11
13.1
Procedure for Creating a New Script File ................................................................................. 12
13.2
Procedure for Creating a "Verify Script File"............................................................................. 13
14.0
Running Service Port Script Files................................................................................................. 13
1.0
Program Description
This program can be used for configuring and monitoring the data on the Cyberex Main Feed Circuit
Monitor (MFCM). It can be used in either of the following communications modes: RS-232, RS-485,
or TCP. Limited configuration can be done when in the RS-485 or TCP modes.
2.0
3.0
PC System Requirements
•
IBM Pentium or higher (or compatible) PC with a free serial port, network interface card, and a
minimum screen resolution setting of 1024 by 768.
•
Microsoft Windows 2000 or higher.
Installation
This program can be installed by double-clicking the 'MFCM-CM_Setup_vX_X_X_X.exe' file
provided and following the on-screen instructions. This setup program will put a shortcut on the
Desktop and in the Windows StartÆPrograms folder.
4.0
The Initial Login
When the program is started, the main window will appear as shown in Figure 4-1 below.
Thomas & Betts Power Solutions y 5900 Eastport Boulevard y Richmond, VA 23231-4453