Download warning - HE Services

PRECAUTIONS FOR MAINTENANCE
2.4.12 PRECAUTIONS TO BE TAKEN WHEN
USING THE HAMMER
When the hammer is used, the pins may come off and metal parts
may be pushed out causing serious injuries. Always proceeds as
follows.
q
If rigid metal parts, like pins, bucket teeth, cutting edges or bearings are hit by a hammer, some pieces may come off and cause
serious injuries. Always wear safety goggles and gloves.
q
When the bucket pins or teeth are hit, the broken parts may be
thrust in the air and cause injuries to the people in the vicinity.
Always make sure that there is no one around.
q
RYA00930
If the pins are hit with force, these may move suddenly and
cause injuries to the people standing nearby.
2.4.13 REPAIR WELDS
Welding operations must be always carried out by a qualified welder, in a place where suitable equipment is available. Welding operations may be the cause of fire and electrocution, therefore do not allow unauthorized personnel to make welds.
2.4.14 RULES TO BE FOLLOWED WHEN
REFUELLING OR ADDING OIL
q
Keep away from naked flames while refuelling or adding oil.
q
Spilled fuel or oil make the ground slippery and may cause accidents; clean any dirty area immediately and carefully.
q
Always tighten the safety caps of the fuel tank and of the hydraulic oil tank securely.
q
Do not use fuel to clean any part of the machine that is dirty with
oil or dust.
q
Always top up the fuel and oil tanks in properly ventilated areas
and refrain from smoking.
q
When refuelling, hold the fuel gun firmly and keep it constantly
in contact with the filler until you have finished, in order to avoid
sparks due to static electricity.
q
Do not fill the tank completely, in order to leave room for the fuel
to expand.
RKA00320
RKA00310
60