Download VG-882-A

Sync setting parameters
HS
VS
CV
Used to set the HS terminal output.
0
Off
No output
1
Nega
The signal is output with a negative polarity.
2
Posi
The signal is output with a positive polarity.
Used to set the VS terminal output.
0
Off
No output
1
Nega
The signal is output with a negative polarity.
2
Posi
The signal is output with a positive polarity.
Used to set whether to superimpose Video-on-Sync onto analog component
signals.
CAU
TION
110
0
Off
Video-on-Sync is not superimposed.
1
R
Video-on-Sync is superimposed onto the R signal.
2
G
Video-on-Sync is superimposed onto the G signal.
3
RG
Video-on-Sync is superimposed onto the RG signal.
4
B
Video-on-Sync is superimposed onto the B signal.
5
RB
Video-on-Sync is superimposed onto the RB signal.
6
GB
Video-on-Sync is superimposed onto the GB signal.
7
RGB
Video-on-Sync is superimposed onto the RGB signal.
• If the overlapping sync is a tri-level sync (HDTV timing) signals, its polarity
cannot be changed.