Download PLM Series

Operation 5
5.1 Navigation
The exclusive PLM features of the Lake Controller
software, when used with PLM Series units, are
accessed in two views: PLM Module View and PLM
Global View. Each has further tabbed views.
To access PLM Module View
Figure 5-1a: PLM Module View tabs
▸▸
PLM Module View is accessed from the Main
▸▸
An alternative method is from Main page button
bar menu. Tap the Modules button, select a
Module, and then tap the I/O Config button. The
I/O Config page opens; tap the Lab.gruppen info
button (F7).
▸▸
PLM Module View is also accessed by tapping
one of the Module icons on the All tab.
View by opening one of the Module icons,
selecting the Levels tab, then tapping on the
Lab.gruppen info button.
Figure 5-1b: PLM Global View tabs
To access PLM Global View
▸▸
PLM Global View is accessed from the All tab.
Tap the PLM Menu button (F9), then tap the
Lab.gruppen info button in the button bar (F8).
Lake Controller User Manual PLM™ Addendum
9