Download 96A0345 - ADB Airfield Solutions

L-807 Wind Cone
Assembly Procedures
5. Assemble the winch and cable assembly.
NOTE: Use the appropriate wiring information in “Schematics ” on page 35 for external
wiring guidance. The wind cone hinge ground strap must be installed. The wind cone
must be Earth grounded at the base. See “Grounding the Wind Cone Pole” on page 27.
Schematics
Parts
Operation
Installation Introduction
Assembly
Procedures
Safety
Table of
Contents
6. Prepare the wind cone assembly. See: “Assembling Wind Cone Sock Cage” on page 17.
Disclaimer
96A0345 Rev. K
3/20/14
© 2011 ADB Airfield Solutions All Rights Reserved
15