Download user manual for sx-3000 standalone integrated

2. SMS
2.7. IMB Configuration
2.7.1. CineCanvas™ and CineLink™ Configuration
Connect a network cable from the Ethernet 2 port of the IMB to the LAN port of the projector that will accept
CineCanvas™ communication. Make sure the IMB and projector are set on the same subnet network. For example,
if the projector is set to 10.10.10.10 and the IMB is set to 192.168.0.200, either the IMB has to change its IP to
10.10.10.xxx or the projector has to change its IP to 192.168.0.xxx for them to be on the same network.
*assuming default subnet of 255.255.255.0
1
Figure 38 SMS Interface [Configuration].
April 19, 2013
- 63 -
SX-3000 Standalone Integrated Media Block™ with
PSD-3000 Portable Storage Device User Manual