Download FT-7900 Programmer Help

120
FT-7900 Programmer Help
Click OK and attach the correct cable. Then try the process again.
Be sure you are using the RT Systems' USB-29B cable or an original CT29B serial cable with the RTS-03 USB to serial adapter. The Version 4
program will work with no other USB or serial cable.
Be sure to wait long enough for Windows to acknowledge the cable and let
you know that your hardware is attached and ready to use.
Should the problem persist, contact RT Systems tech support for assistance.
13.2
Communications | Send Data to
Sends the contents of the current file and the settings file to the radio.
Note: In the Version 4 Programmers you can have files open for
several different radios at one time. The Programmer can send a file
only to the radio it is for. The extension of the file tells you which
radio it is for.
You can open and send a file created for one radio to another;
however, you must open that file as one for the receiving radio. See
the File | Open section of this Help for details on this process.
Current File
The Programmer can work with several radio files at one time. There is no need to
close extra files before executing the Send data to process.
The current file will be sent to the radio during the Send Data To process. The current
file is the one that appears in the main window of the Programmer. Basically, what you
see on the screen is what is sent to the radio.
© 2012 RT Systems, Inc.