Download DVR User Manual
Transcript
button to setup the previous channel groups of 33 dwell picture, click button to set the latter channel groups of dwell picture. Step5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current Step4: selected the split mode, then setup current picture group. Click Fig 4-8 live configuration-main monitor Step2: select split mode: 1ϧ12ϧ22ϧ33ϧ34ϧ4 and channel Step3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display 4.2.2 Main monitor Step1: enter into system configurationÆlive configurationÆmain monitor; refer to Fig 4-8: Fig 4-7 live-color adjustment Step3: in this interface, user can adjust brightness, hue, saturation and contrast in live; click “default” button to resort default setting, click “OK” button to save the setting. Step4: user can setup all channels with same parameters, tick off “all”, then do relevant setup. Step5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. Digital Video Recorder User Manual