Download DVR User Manual

Transcript
button to setup the previous channel groups of
33
dwell picture, click
button to set the latter channel groups of dwell picture.
Step5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
Step4: selected the split mode, then setup current picture group. Click
Fig 4-8 live configuration-main monitor
Step2: select split mode: 1ϧ1௚2ϧ2௚2ϧ3௚3ϧ3௚4ϧ4 and channel
Step3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display
4.2.2 Main monitor
Step1: enter into system configurationÆlive configurationÆmain monitor; refer to Fig 4-8:
Fig 4-7 live-color adjustment
Step3: in this interface, user can adjust brightness, hue, saturation and contrast in live; click “default” button to resort
default setting, click “OK” button to save the setting.
Step4: user can setup all channels with same parameters, tick off “all”, then do relevant setup.
Step5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.
Digital Video Recorder User Manual