Download POWER PLANT CONTROLLER

User Manual
POWER PLANT
CONTROLLER
5.10. ETHERNET TCP/IP COMMUNICATIONS INTERFACE WIRING........................... 25
5.11. CABINET VENTILATION ....................................................................................... 26
5.12. COMMANDS ON THE CABINET FRONT .............................................................. 27
6. MAINTENANCE ...................................................................................................... 28
6.1. MAINTENANCE SHEET ........................................................................................ 28
6.2. CHECK THE EXTERNAL/INTERNAL CONDITIONS OF THE CABINET ............... 29
6.3. AIR FILTER MAINTENANCE ................................................................................. 30
6.4. CHECKING THE SEALS, LOCKS AND HINGES ................................................... 31
6.5. CHECK THE FAN .................................................................................................. 31
6.6. CHECKING CONTROL AND AUXILIARY VOLTAGES (24 VDC 230 VAC) ........... 32
6.7. CHECKING THE RELAYS AND SWITCHES ......................................................... 32
6.8. CHECKING THE TIGHTENING TORQUE ............................................................. 33
7. DESCRIPTION OF THE HMI .................................................................................. 34
7.1. NAVIGATION BAR ................................................................................................. 34
7.2. PASSWORD .......................................................................................................... 35
7.3. DESCRIPTION OF THE HMI PAGES .................................................................... 36
7.3.1.
ALARMS AND WARNINGS ......................................................................................... 37
7.3.2.
PLANT DATA ............................................................................................................... 40
7.3.3.
TREND ........................................................................................................................ 41
7.3.4.
CONFIGURATION MENU ........................................................................................... 42
7.3.5.
SET POINT .................................................................................................................. 43
7.3.6.
SERVICE ..................................................................................................................... 44
8. DATA TRANSFER VIA MODBUS TCP/IP PROTOCOL ......................................... 45
Rev. 00 - 17/04/2014
3/45