Download AFG1022 Arbitrary Function Generator Quick Start User Manual

Getting started
9.
The instrument displays a
message telling you not to
remove the USB device or
power off the instrument
until the update process
is complete. The progress
bar of the screen
indicates the update
process is in progress.
NOTE: A firmware update
usually takes approximately
under a minute. Do not remove
the USB memory during the
update process.
NOTE: If you accidentally
removed the USB memory
during the update process, do
not power off the instrument.
Repeat the installation
process from step 3.
10. Wait until the instrument
displays a message
saying that the operation
is complete.
NOTE: If the operation
complete message is not
displayed, do not power off
the instrument. Repeat the
installation process from step
2 using a different type of
USB memory device.
11. Remove the USB memory
device from the
front-panel USB
connector.
12. Push the front-panel
Utility button to display
the Utility menu.
Confirm that the
firmware has been
updated.
AFG1022 Quick Start User Manual
11