Download AFG1022 Arbitrary Function Generator Quick Start User Manual

Operating basics
Generate a burst waveform
The instrument can output a burst using standard waveforms such as sine,
square, ramp, and pulse, or arbitrary waveforms. The instrument allows you
to use the following two types of burst mode:
Triggered burst mode. A specified number (burst count) of waveform
cycles are output when the instrument receives a trigger input from the
internal trigger source, an external trigger source, a remote command, or
the Manual Trigger button.
Gated burst mode. The instrument outputs a continuous waveform
when an effective gate signal is applied externally, when the Manual
Trigger button is depressed, when a remote command is applied, or
during 50% of the selected internal trigger interval.
AFG1022 Quick Start User Manual
41