Download User Manuals Apecs 500

®
APECS 500 Electronic Engine Speed Governing System
Manual SE-4107
Calibration Setup & Configuration Parameters Flowchart
Step 1
Step 2
Setup the APECS
Calibration Tool
(ACT)
Configure speed input:
PULSES_PER_REV
PULSES_PER_UPDATE
!
22
Step 3
Calibrate the range of
commanded engine speed.
SET_SPEED_MIN
SET_SPEED_MAX
The APECS 500 is a user configurable engine speed governor and will follow your
settings and commands immediately. It is possible to enter values in the APECS
module that are in excess of what the engine is capable of performing and outside of
safe operating range. It is the user'
s responsibility to pay attention when entering
data into the APECS or the ACT. Entering values outside of safe operating range
can result in serious physical injury and/or damage to the equipment or application.
Woodward