Download EasyCheck 3000

EasyCheck 3000
12.3.1 Potential error messages
Here are a few error messages which could pop up during operation:
1.
No
detector
found !!
address
back[Esc]
Press [ Esc ]:
———Clone Detector———
...read error !
back[Esc]
Cause:
Remedy:
Source detector or target detector not found.
Quit action, check correct fit of detector or adapter and try again.
2.
———Clone Detector———
Detector-Appl < Vxx
clone NOT possible!
back[Esc]
Cause:
Remedy:
Source detector or target detector not found.
Quit action, check correct fit of detector or adapter and try again.
Version 2.1
12