Download Parameter input

3.2.3 Reinforcement bars
The geometry of reinforcement bars will be defined only by two lines. The first bar will be
created and then the second bar will be copied.
The creation of the first bar starts by clicking the icon
or with the command from the
main menu Geometry | Create | Straight line. The command line in the
bottom of the main window should be used for the coordinates’ definition. The coordinates
of the reinforcement are (0.05,0.05,0.05) and (1.275,0.05,0.05). See Figure 33.
The first bar
Figure 33: The first reinforcement bar
Parameter input:
Coordinates of the line:
1: 0.05,0.05,0.05
2: 1.275,0.05,0.05
28