1
Download OPC90 Server User Manual
Transcript
OPC90 Server DV_HI_ACT DV_LO_ACT HI_HYS VT_BOOL VT_BOOL VT_R4 Read Read Read/Write HI_HI_HI_LIM VT_R4 Read/Write HI_HI_LIM VT_R4 Read/Write HI_LIM VT_R4 Read/Write LO_LIM VT_R4 Read/Write LO_LO_LIM VT_R4 Read/Write LO_LO_LO_LIM VT_R4 Read/Write LO_HYS VT_R4 Read/Write NEXT_HI NEXT_LO LIMITED CALC OUT_RANGE SCAN_OFF RATE_ACT SUP_ACT VAR_ACT HW_FAIL_IND HI_REF MID_REF LO_REF HI_CONST LO_CONST VT_R4 VT_R4 VT_BOOL VT_BOOL VT_BOOL VT_BOOL VT_BOOL VT_BOOL VT_BOOL VT_BOOL VT_R4 VT_R4 VT_R4 VT_R4 VT_R4 Read Read Read Read Read Read Read Read Read Read Read Read Read Read Read The RoviSys Company Deviation high alarm active indicator. Deviation low alarm active indicator. The amount the alarm value must lower below the current high alarm level limit before the associated active current alarm condition clears. The setting for the alarm limit used to detect the high high high alarm condition. The setting for the alarm limit used to detect the high high alarm condition. The setting for the alarm limit used to detect the high alarm condition. The setting for the alarm limit used to detect the low alarm condition. The setting for the alarm limit used to detect the low low alarm condition. The setting for the alarm limit used to detect the low low low alarm condition. The amount the alarm value must raise above the current low alarm level limit before the associated active current alarm condition clears. Next high alarm limit to be reached. Next low alarm limit to be reached. Value is limited indicator. Using calculated input indicator. Out of range detected indicator. Scan disabled indicator. Rate alarm indicator. Suppress alarm indicator. Variable alarm indicator. Hardware Failure indicator. High display reference value (DAANG S1). Middle display reference value (DAANG S2). Low display reference value (DAANG S3). High constraint limit (DAANG S4). Low constraint limit (DAANG S5). Version 7.0 Page 57
