Download M2110 Hardware Reference Manual
Transcript
IRIS OEM Edition Hardware Reference Manual 5. In the Sensor Board tab, for the Application Name, select “XMDA300” from the pull-down menu. 6. Click on the DONE button. Soon after that it should display incoming data. Click on the MoteView window to view data, time plots of sensor values, and topology of the Mote network. 2.1.5 User Interfaces You should see nodes one, two and three appear in the node list on the left hand side of the MoteView window. MoteView has four main user interface sections which you can browse and use. • Toolbar / Menus: Allows the user to specify actions and initiate command dialogs. • Node List: Shows all known nodes in a deployment and health status summary. • Visualization Tabs: Enables the user to view the sensor data in various ways. • Server Messages: Displays a log of server events and incoming messages. Node List Toolbar/Menus Visualization Tabs Server Messages Figure 2-1. Screenshot of the MoteView GUI More information about MoteView and its features can be found in the MoteView User’s manual. Doc. # 7430-0549-01 Rev. A Page 7