Download Scsmod100 ThirdEdition

5.2.4 Scanning an Image
Start Scanning from Keypad
Scanning can be initiated from the Keypad if the Print LED on the Keypad is lit.
● Position microfilm image in the scanning area on the viewing screen.
● Press Print key on the Keypad.
During the downward movement of the scan bar, the microfilm image data is transferred to the printer.
After completion of the scan, the scan bar returns to the Park position. The Print LED lights again.
Scan Low Contrast Microfilms
To scan microfilms with very low contrast:
● Hold down "shift" key and then press the "low contrast" key.
The images will be processed in the image processor with the image processing parameters of the "Low
Contrast" filter TouchUp, which is optimized for low contrast images, and immediately transmitted to the
printer.
ScreenScan™
21