Download Scsmod100 ThirdEdition

1.4
Model Overview
ScreenScan™ is available in three models.
ScreenScan™ model configuration:
Model
Scanner with Cable
Image Processor Box/Board
Power Supply with Cable
Keypad with Cable
ScreenScan™ Software
ScanKey Credit
100
Yes
Box
Yes
Yes
No
Unlimited
PC
Yes
Board
No
No
Yes
No Key
A3
Yes
Board
No
No
Yes
No Key
Model 100 is equipped with a Centronics interface board, which sends the scan data to any printer
compatible to the Hewlett Packard PCL printer language through a standard parallel printer cable. The
memory of the printer should be enough to store a complete image. At least 2MB is recommended for
letter/A4, otherwise print out will slow down a little bit. Pressing the keypad "Print" key starts a scan,
transmits the black/white image via the parallel interface to the laser printer and automatically prints it.
PC Model includes a letter/A4 sized scanner and screen together with a ScreenScan™ scanner board that
is installed in a PC. The scanner is operated via the ScreenScan™ software under Windows, which allows
saving of bi-tonal TIFF image and grayscale JPEG images, direct faxing and emailing, and much more.
Ask your ScreenScan™ dealer for further information.
A3 Model includes a 11x17/A3 sized scanner and screen together with a ScreenScan™ scanner board
that is installed in a PC. The scanner is operated via the ScreenScan™ software under Windows, which
allows saving of bi-tonal TIFF image and grayscale JPEG images, direct faxing and emailing, and much
more. Ask your ScreenScan™ dealer for further information.
1.5
ScreenScan™ Options
Remote Interface
With the option "Remote Interface"
it is possible to enable or disable a ScreenScan™ scan via the Remote cable; and
ScreenScan™ will signal via Remote cable when a scan is in progress.
A ScreenScan™ Model 100 can be upgraded with this option. There are two different versions, which take
into account the different requirements (coin box, charge card etc.). Ask your ScreenScan™ dealer for
more details.
ScreenScan™
9