Download Installing FreeWave Tool Suite

Transcript
FreeWave Tool Suite
2. When prompted to select the network structure, click “Next.”
NOTE: As of Tool Suite release version 2.4.0, Point to Point and TDMA network structures are
not yet supported in the Network Design feature.
3. For FreeWave Plus radios to successfully communicate with one another within a network there
are 8 critical settings that must be the same across all radios in the network. These settings are
inherited by any Slave or Repeater connected to the Master template. When prompted, set the
following to the desired values:
a. Subnet Mask: This value is normally assigned by a network administrator.
b. Default Gateway: This value is normally assigned by a network administrator.
c.
Frequency Key: Values available to choose from are numbers 0 through 9 and letters A
through E
d. Max Packet Size: Choose from numbers 0 through 9.
e. Min Packet Size: Choose from numbers 0 through 9.
40