Download ControlPoint Softwar..

5—Client Menu and Tool Bar
Position X
The X box displays the current position of the selected window and allows
you to type a specific X position for that selected window. Click the Apply
button to activate the change.
Position Y
The Y box displays the current position of the selected window and allows
you to type a specific Y Position for that selected window. Click the Apply
button to activate the change.
Size - Width
The W box displays the current width of the selected window and allows
you to type a specific Width for that selected window. Click the Apply
button to activate the change.
Size – Height
The H box displays the current width of the selected window and allows
you to type a specific Height for that selected window. Click the Apply
button to activate the change.
Lock Aspect Ratio
Lock Aspect Ratio forces the window to preserve its current aspect ratio
when resized; it locks the aspect ratio of the interior (the image portion).
Note, that when this is enabled, the current aspect ratio of the window at
the time of the operation is used and preserved from then on. Lock
Aspect Ratio preserves the destination window aspect ratio, not the
aspect ratio of the source signal. To lock the aspect ratio to the source
signal, uncheck Lock Aspect Ratio, select Normal or Half Size, then
select Lock Aspect Ratio.
Note
Selecting Lock Aspect Ratio locks the current aspect ratio
(even if incorrect). Select Normal, then lock aspect ratio,
and then set the size of your window.
Size & Position - Window Coordinates
Click on the Window Coordinates tab to view the position and size for
the selected window. The Coordinate set (X, Y) control the position of the
window relative to the top left corner of the window. This will include the
Frame and Tile if one is applied. If no Frame is applied, the Internal and
Window Coordinates will be the same. The size of the window is
controlled by the W (width) and H (height) of the window including the
frame.
82
ControlPoint 2.11 Software Manual