1
Download Functional Description Manual
Transcript
Index 2-3 ECODRIVE03-FGP-01VRS Feedrate-override S-0-0108 = 0 1-38 G Gain adjustment failed 1-85 H Homing not permitted in this operation mode 1-74 Homing of absolute encoder not possible 1-74 Homing only possible with drive enable 1-73 Homing velocity to high 1-75 I Incr. encoder emulator pulse frequency too high 1-17 Incremental encoder required 1-81 Inertia detection failed 1-84 Input value for max. range too high 1-67 Interpolation acceleration = 0 1-33 Interpolation velocity = 0 1-33 Invalid addressing of AT-data container A 1-45 Invalid addressing of MDT-data container A 1-44 Invalid amplifier data (->S-0-0022) 1-61 Invalid communication parameter (S-0-0021) 1-51 Invalid feedback data (->S-0-0022) 1-60 Invalid parameter(s) (->S-0-0022) 1-56 Invalid SSI parameter (->S-0-0022) 1-59 J JOG mode negative 1-97 JOG mode positive 1-96 L Limit error communication parameter (S-0-0021) 1-51 Load error LCA 1-58 Load-side motor encoder with inductance motor only 1-68 Locked with password 1-77, 1-79 Low battery voltage 1-16 M Mains fault 1-19 Max signal frequency of encoder 2 exceeded 1-16 Max. signal frequency of encoder 1 exceeded 1-11 Modulo range error 1-67 Motor feedback data not valid 1-83 Motor overload 1-31 Motor overtemp. prewarning 1-35 Motor overtemp. shutdown 1-8 Motor temp. surveillance defective 1-9 Motor type P-0-4014 incorrect 1-58 DOK-ECODR3-FGP-01VRS**-FKB1-EN-PE
