Download Starting Guide FRENIC-MEGA Customized solution for elevators

Version
0.0.1
0.0.2
1.0.0
1.0.1
1.1.0
1.1.1
1.2.0
1.3.0
2
Changes applied
Draft
Small text corrections
1st version
Small text corrections
Small figure corrections
Information about P09 and P11 is added
Terminal X8 is changed by Y3 in Chapter 1.
Numbers of page in Contents has been
corrected.
Chapter 3.4 is added.
Explanation of E16 adjustment is modified.
Setting of J95 is changed.
H96 included on chapter 7.
Terminal EN1 and EN2 are added.
d25 is included in default setting.
Table 1 is modified.
Alarm messages table modified.
Updating to inverter -4ELF version
SW Rom 3703 (see “SI27-5471i” for details)
Date
30.10.2010
21.12.2010
Written
J. Alonso
D. Bedford
Checked
Approved
22.12.2010
J. Alonso
D. Bedford
D. Bedford
22.12.2010
J. Alonso
D. Bedford
D. Bedford
24.03.2011
J. Alonso
D. Bedford
D. Bedford
24.08.2011
J. Alonso
29.12.2011
J. Alonso
04.05.2013
S.Gentiluomo
J. Alonso
J. Català