Download REVISION

Dagger100 User’s Manual Rev E
Revision History
Rev
ECO#
Author
Date
A
TDS
04/27/2010
B
TDS
05/28/2010
C
JLW
05/16/2011
D
E
01/27/2012
PKN
04/23/2012
Description of Change
As released
• Updated sections to reflect CE unit
requirements
• Cut Chart updates
• Changed voltage divider board part
number and description
• Added duty cycle limits for
expanded metal cutting
• Updated consumable part numbers
• Updated error codes
• Added caution concerning keeping
torch consumables mating surfaces
clean
• Added instructions for installing
voltage divider card in Section 3.
• Updated Section 5 with
troubleshooting for Exceeded Max
Cut Voltage (11 blinks)
• Changed torch handle part number
and air regulator filter in Section 6.
• Updated consumable part numbers
• Updated Cut Charts
This documentation may not be copied, photocopied, reproduced, translated, or reduced to
any electronic medium or machine-readable format without explicit written permission from
Kaliburn.
4130 Carolina Commerce Parkway
Ladson, SC 29456 USA
(843) 695-4000 - Phone
(843) 659-4001 - Fax
www.kaliburn.net
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.