Download User Manual

Click ‘Input-3D Parameter’ or ‘Input Parameter’ on the toolbar, and the interface for the
parameter setting is shown in Figure 49.
Figure 49 Interface for the parameter setting.
Table 12 Description of the parameters of the interface for the parameter setting
Parameter
The path of the parameter file.
Add Detector Result
Add a detection result.
Del Detector Result
Delete a detection result.
Wavelength
The central wavelength of the spectrum.
Detector Index
The number of the detector.
File Path
The file path of the detection result.
Change Path
Change the file path of the detection result.
The interface after inputting the parameters is shown in Figure 50.
Figure 50 Display after setting the parameters for 2D-3D energy mapping.
Click ‘Simulation-Start’ to start the mapping process as shown in Figure 51.
37