Download BSC-50-E - RCC ITALY

Contents
1. Introduction
2. Operation modes
3. Setup
3.1 Packing list
3.2 Hardware setup
3.2.1 Jumper settings
3.2.2 SIM card & Battery installation
3.2.3 Wiring the digital inputs
3.2.4 Wiring the analog inputs
3.3 Configuration commands
3.3.1 Configuring a digital input for alarming
3.3.2 Configuring an analog input for alarming
3.3.3 Setting alarm message texts
3.3.4 Selecting alarm messages for a DI event
3.3.5 Selecting alarm messages for an AI event
3.3.6 User setup
3.3.7 Defining event specific alarm recipients
3.3.8 Naming the unit
3.3.9 Setting the Status message period
3.3.10 Status message idle period
3.3.11 Setting the number of transmission retries
3.3.13 Factory settings
3.4 Programming the unit
4. Operation
4.1 Alarm Messaging
4.2 Status Messaging
4.3 Data transfer
5. Technical characteristics
6. Battery life
7. Command summary
3
3
4
4
7
9
10
10
10
10
11
11
12
Disclaimer
• While every effort has been made to ensure that the information in this guide is
accurate and complete, no liability can be accepted for any errors or ommissions.
• Infinite Ltd reserves the right to change the specifications of the hardware and
software described in this guide at any time without prior notice.
• No part of this guide may be reproduced, transmitted, stored in fixed or removable
media or translated into any language in any form without the prior written
permission of Infinite Ltd.
• Infinite makes no warranties for damages resulting from corrupted or lost data
due to malfunction of the hardware or the software.
Version: 2.0
Copyright © 2009 - 2011 – Infinite Informatics Ltd
All rights reserved.
BSC-50-E User Guide
2