Download MVI46-MCM Training - ProSoft Technology

EXERCISE OVERVIEW (detailed step-by-step instructions to
follow):
A.
B.
C.
D.
E.
F.
Boot PC and install ProSoft Software
Install ProSoft InRAx Modbus MVI module in A-B rack
Configure RSLinx to talk to SLC
Using RSLogix500 software to Modify the Sample Project
Downloading and Testing the Modified Sample Project
Using ModScan to simulate the Modbus Master
EXERCISES:
Exercise A. Boot PC and install ProSoft Software
1. Start your PC and allow it to boot to the Windows Desktop
2. Place the ProSoft InRAx Solutions CD in your CDROM drive
3. If AutoPlay is enabled, you will see the following window appear in the center of
your desktop area:
4. If AutoPlay is not enabled and this window does not appear automatically,
double-click the My Computer icon
and then double-click on the ProSoft drive icon (drive D:, below.)
5. All product documentation on the Solutions CD is stored in Adobe Acrobat .pdf
format files. If you already have Adobe Acrobat or Acrobat Reader, version
4.0 or higher, installed on you computer, skip to Step 7.
Page 3 of 33
Version: A.05