Download "user manual"

(7) Cross section figure
In “Cross Section chart“, the water course water level and the cross section figure of the river course
grid can be stacked and displayed. In addition, animation can be displayed by using “Time Control”
together.
Click the “River Cross Section Chart” option from the “Tool” menu or from the pop-up menu as shown to
display file open dialog.
Fig. 10.30 Function of cross section figure screen
Reading of the selection of the file for the crossing chart display is done.
When the corresponding Grid No. column is selected, the cell
number been selected by the cell is input.“OK" When the button is
clicked, the cell number is registered. “Cancel" The dialog is shut
without registering when the button is clicked.
An additional reading of the section data can be done with the
Read button.
Here, the parameters a and b for H-Q equation can be changed
H  a Q b
Sample data
Water depth at the max flow of calculation result is displayed.
If there is no appropriate data to be displayed in the list, by
“Cross Section Data Reading“, files can be read from any of the
folder (The files of the cross section figure data are in CSV form).
Select the data file which needs to be displayed and click “Open“,
the list of “Cross section data selection“ can be added.
163