Download Plantronics CT14 User Guide
Transcript
Wearing the Dial Pad with the Belt Clip Cable route 1 Plug the headset cord into the 2.5mm jack on the top of the dial pad. 2 Route the cord through the dial pad’s cable routing slot on the back of the dial pad. Attach the belt clip only after you have routed the cord. 3 Insert the tabs on the sides of the belt clip into the holes on either side of the dial pad. Press the belt clip down until it clicks into place. To remove the belt clip pull one side of the belt clip to release the tab from the hole. en www.HeadsetPlus.com 5