Download Complete User Manual

CAUTIONS
Legends
Serious injury can result from electric shock.
Be sure to turn off the power before installing or
servicing any meter.
These symbols appear on meter labels.
Fire can result from loose electrical
connections. Ensure that all connections are
secure.
G Equipment protected throughout by double
insulation
1 Caution, risk of Danger
H Alternating Current
A loose or improperly connected neutral can
damage equipment and cause fires. Most meters
that count faster than they should are connected
to a bad neutral.
Abbreviations & Glossary
Common abbreviations used in this manual
include:
Current transformers (CTs) should not be
placed over wires with current flowing through
them without connecting them to the meter or
twisting the two wires coming from the CTs
together. A very serious shock hazard exists if
the wires are just left loose.
AMR - Automatic Meter Reading System
CT - Current transformer
KWH - Kilowatthour
Element - An input for measuring power,
usually a current transformer (CT)
These meters should only be installed by
experienced electricians. If you do not fully
understand these instructions, call the Customer
Support at 1-805-688-9696 or 1-800-824-9696
for clarification.
In most localities, a permit and inspection is
required to install the meters.
Rev. 8/25/2015
i