Download DAQSTATION DX100 User`s Manual

10.15 Setting the Temperature Unit (Basic Setting
Mode)
Select the temperature unit from °C or °F.
Procedure
• These procedures are carried out in the basic setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter.
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press
MENU
Press
FUNC
.
for 3 seconds. The menu screen for the basic setting mode appears.
To display the setting screen press the soft key
#2
.
1
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1. Temperature Unit
Select [C] or [F].
[C]: Celsius
[F]: Fahrenheit
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.
10-24
IM 04L01A01-01E