Download A-Track DCC - Reference Manual - A

A-Track Reference Manual
Choosing any slot enables the Move Up and Move Down buttons below the
allocation slots. Clicking the Move Up button transfers the Item in Slot 2 into Slot 1,
with the Item in Slot 1 moving to the bottom slot (defined by the Recall Depth), and
all intermediate Items moving up one slot.
Move Up achieves the same effect as pressing the physical RECALL button on an
NCE ProCab Handheld Controller once Items have actually been allocated, but note
carefully that, at this stage, moving Items from one slot to another has no effect
whatsoever on the actual current allocations within the selected NCE Cab.
Move Down lets you rotate allocations in the opposite direction, eg. from Slot 1 to
Slot 2, and thus acts like a reverse NCE ProCab RECALL button.
You can use the Move Up or Move Down buttons to move the contents of the
selected slot to Slot 1, for example, so that, when you finally allocate the Item
which was originally right-clicked to the NCE Cab, it will become the locomotive or
consist under active control by that Cab –
Once you are satisfied that you have picked the right slot, and that the Items are in
the positions you want, click the Allocate button. The Address and Description of
the Item to be allocated is copied from the Item List to the selected slot, and
displayed against a pink background –
Page 63 of 303
Version 4.3.2