Download Manual - GeoSIG Ltd.

GeoSIG Ltd
GNC-CR Operation Manual
GS_GNC-CR_Manual_V07.doc/29.11.2001
Page ii
Document Revision
Version
15.12.97
10.02.99
23.05.00
20.02.2001
16.07.2001
29.11.2001
09.01.2006
Action
Updated and formatted
Updated and formatted
Change of company name
Added Installation procedure and drawings
Change of software title
Adding GNC-CR24
Change of Memory sizes/upgrade, Formatting
Disclaimer
GeoSIG Ltd. reserves the right to change the information contained in this document without notice. While the information
contained herein is assumed to be accurate, GeoSIG Ltd. assumes no responsibility for any errors or omissions.
Copyright Notice
No part of this document may be reproduced without the prior written consent of GeoSIG Ltd. The software described in
this document is furnished under a license and may only be used or copied in accordance with the terms of such a
license.
Trademark
IBM is a registered trademark of the International Business Machines Corp; Armonk, NY
Other brand and product names are trademarks or registered trademarks of their respective holders.
All rights reserved
GeoSIG Ltd.
Switzerland