Download User Manual LabCon

Transcript
LabCon Handbook
Version 1.14
7.4 Monitoring
As demonstrated in ch. 12.3 - pnp4nagios, all LabCon® sensor values are saved in a
“Round Robin” database via the pnp4nagios plug-in. This data can be displayed using
the same plug-in.
Monitoring is possible via the LABCON ® side menu located on the Nagios page.
Figure 39: Nagios Menu
You can find an overview page, either via the link “Monitoring”, or via the specific
group name. Figure 40 shows the overview found under “Monitoring”.
© 2013 pikkerton GmbH
Page 68 / 95