Download STONEX R2 - geobauen

STONEX R2
Press [SPRIAL] in “HZ Alignment Type” menu to define spiral. A spiral consists of the
minimum radius and arc length. The rule of radius value: along the forward direction of
the curve. When the curve turns right, the radius value is positive. When the curve turns to
left, the radius value is minus. The arc length can not be negative.
OPERATIONAL STEPS
OPERATION
DISPLAY
【HZ Alignment Type】
① Press SPRIAL key in the HZ
Alignment Type menu to define spiral.
Chain. ：
AZ：
[F3]
LINE
Input
the
②Enter the radius and arc length of the
radius
and
spiral. Press [ENT] to record the data.
arc length of
100.000 m
0°00′00″
ARC
SPIRAL
POINT
【Define HZ AL】
Type：
Radius：
ArcLen：
2/1
SPIRAL
---.--- m
---.--- m
spiral
+[ENT]
PREV
NEXT
SEARCH
↓
【Define HZ AL】
③ Press [F2] (NEXT), the program
displays “Save Edit Alignment?” If
yes, press [F4] (OK). To re-edit it,
[F2]
Save Edit Alignment?
press [F1] (CANCEL).
CANCEL
OK
【HZ Alignment Type】
④Press [F4] to store this alignment
and return to alignment main menu,
Chain.：
AZ：
and displays chainage of end point of
111.000 m
80°20′14″
the spiral and azimuth of this point.
LINE
ARC
SPRIAL
Point
Press [POINT] in “HZ Alignment Type” menu to define point. A point element consists of
129