Download L-Gate
Transcript
L-Gate User’s Manual 62 LOYTEC Figure 51: The software has been successfully installed. 6.3 Configuring with LNS 6.3.1 Register the L-Gate LNS Plug-In If the L-Gate shall be configured using LNS-based tools (e.g. NL200 or LonMaker), the LGate configuration software needs to be registered as an LNS plug-in. In the following, the process is described for LonMaker for Windows 3.1. Otherwise, please refer to the documentation of your network management tool on how to register an LNS plug-in. Version 1.0T LOYTEC electronics GmbH