Download Feature Activation
Transcript
The files: File INF: (extension .txt or .inf) inform about the place of the various files to download (relative way or absolute) Firmware: Version‟s code which needs to be upgrade by the phone File “common_config”: (extension.txt) informs the phone about configurations which need to be upgrade on the level network, sip (or mgcp), auto provisioning, etc… File MAC: (extension.txt). Same that the file “common_config” but its name is based on phone‟s MAC address which needs to be upgrade and the configuration which is made inside will concern only the phone which has this MAC address. It has priority if the two files are on TFTP server. File “TelConf”: (extension.txt), a set of audio parameters, which configures the phone for the audio performance. Files Deck: (ONLY MGCP) (extension .thd), allow phone to know how to display some flows (xml) on screen. Generally, it‟s files which are sent via the operator chosen to connection to the service. We provide often to the customer only the upgrade firmware. The other files are normally managed by the administrator who takes care of the procedure of auto provisioning. DHCP option: Option 66: IP address of TFTP server where are the files which need to be downloaded. Option 67: File INF‟s name on TFTP server Option 150: IP address of TFTP server used if this option (optional) is in DHCP options Option 43: Used to http upgrade. If options 66 or 150 are not present, option 43 will be selected. Option Next server Address: IP address of TFTP server used in some case when the other options are not manageable but this one yes. Put in the following way in the file of configuration of DHCP (dhcpd.conf) TB30s SIP Administrator Guide v1.3 Page 55 of 259