Download vacon®10 quick guide

Transcript
installation
vacon
•3
2. INSTALLATION
2.1 Mechanical installation
There are two possible ways to mount Vacon 10 in the wall. either screw or DIN-rail
mounting.
MI3
=M5
MI2
MI1
=M5
=M4
BACK
RESET
LOC
REM
OK
LOC
REM
BACK
RESET
LOC
REM
BACK
RESET
OK
OK
Figure 2.1: Screw mounting, MI1 - MI3
1
2
Figure 2.2: DIN-rail mounting, MI1 - MI3
Note! See the mounting dimensions on the back of the drive.
Leave free space for cooling above (100 mm), below (50 mm), and on the sides
(20 mm) of Vacon 10! [ side-to-side installation allowed only if the ambient temperature is below 40 °C.]
24-hour support +358 (0)201 212 575 • Email: [email protected]
2