Download SanDevices E682 Pixel Controller Operating Manual

(clusters 3 and 4) pixel power supply, but may also be powered independently by a power
supply that is capable of providing 7-24 volts DC at about 300ma, connected to J19.
The E682 has a large number of programmable options to allow the board to be used in many
different configurations. Programmable options are set using a web page. This page also
displays operating statistics and the current configuration data.
Supported Pixel Types:
WS2801, WS2811, LPD6803, 180X, GE ColorEffects, TLS3001, CYT3005, 16716, 981X, and Native
DMX mode. The E682 supports 8-bit dimming (256 intensity levels) for the 5-bit LPD6803
pixels.
Note that many common pixel types are “clones” of others.
WS2811 = 1804
CYT3005 = TLS3001
Some common examples are:
Full Pixel Type List, Supported Pixel Types (E682)
E682 Chip#
Common Type
Also Equivalent To
0
1
2
3
4
5
6
7
8
WS2801
LPD6803
GE ColorEffects
TM1804(fast mode)
SM16716
Native DMX
LPD8806
P981x
TLS3001
WS2803
D705, LPD1101, UCS6909, UCS6912
WS2811, TM1803, TM1809, TM1812, SM16715
HX512A, MY994X and standard wired DMX fixtures
LPD8809
TLS3002, CYT3005
Please note that the above-listed compatibility is believed to be accurate but not all
listed pixel types have been tested to verify the compatibilies listed.