Download Remote Lighting Controller FEC Type: HP0656/7/8 User Manual

FEC Remote Lighting Controller HP0656
User Installation and Operation Manual
5.6.5 Relays – Setting which relays respond to inputs
By default the following mapping exists between inputs and relays set:
VHF:
3 Clicks – Relay 1, 5 clicks – Relay 2 and 7 Clicks – Relay 3
Keypad:
Ch1 (channel 1) – Relay 1, Ch2 – Relay 2 and Ch3 – Relay 3
GSM:
Ch1 (channel 1) – Relay 1, Ch2 – Relay 2 and Ch3 – Relay 3
Using this option allows any combination of relays to be mapped to these inputs.
Note: If no relays are selected the unit will not enter the timeout period.
In the above example, Ch1 or 3 Clicks will activate Relay 1 (by default).
This has then been changed instead to activate Relays 2 and 3.
This is a powerful facility for performing a variety of switching tasks.
RLC Version 2 Issue 2
© Interleader Ltd 2015
22 July 2015
Page 44 of 83