Download User`s Manual

Copyright
Copyright 1999
We make no warranty of any kind in regard to this material, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. We are not liable for any errors contained
herein or incidental or consequential damages in connection with furnishing, performance or use of this
material.
This document and the information contained herein are the property of us.
No part of this document may be reproduced, transmitted, stored in a retrieval system, transcribed, or
translated into any language or computer language in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise, without the express written consent and authorization.
Trademarks
MS-DOS, WINDOWS, WINDOWS for Workgroups, Windows 95, Windows 98 and WINDOWS-NT are
trademarks or registered trademarks of Microsoft Corporation.
NetWare is a registered trademark of Novell, Inc.
Intel, i386, i486, i486DX2, and Pentium are trademarks of Intel Corporation.
Other manufacturers’ product names that appear in this manual are for identification purposes only and are
acknowledged to be trademarks or registered trademarks of their respective companies.
The following information is needed to assist in problem resolution.
•
•
•
•
•
Model type, serial number, and product description
Type and version number of Operating System you are using. E.g. MS-Windows95
Software driver product type and version number.
Motherboard BIOS version.
Location of purchase.
The README.TXT File
The README.TXT file on the 3092S/SL/3191E DRIVER DISK 1 contains important updated information
and corrections to this User’s Manual. README is a standard ASCII text file that may be read with any
word processor or text editor.
To view the README file from the MS-DOS prompt:
Type the following command from the MS-DOS prompt:
C:\> type readme.txt | more
This will permit you to page down the file, one screen at a time to read the file.