Download User Manual - AAS Technology

Panel View
..
NO.
Component
1
Power LED
2
Power
Supply
Input
3
RJ45
4
VGA
Description
Indicate if power supply is
normal
100V~240V 50-60Hz
power input connector
The green LED light on
indicates working status
The yellow LED light on
indicates over-current
protection
Video output
VPH-100T
BNC-M
DC-M
Installation
1.
2.
3.
4.
5.
6.
..
Make sure any signal source (camera) and/or monitor/DVR are turned off during installation.
Use DB15 to BNC cable to connect DVR and Transceiver.
Use network cable to connect DVR and Transceiver.
Connect cameras with receiver.
Check whether installation is good and power the device(s).
Power camera, DVR, monitor, etc.
Specification
..
16CH Power & HD Video UTP Transceiver
Model
Transmission & Video
Properties
Protection Level
AAS-VPHP15-16K
Transmission Channel
Video Output
Video In / Power Output
Transmission Distance
16 Channels
2x DB15 (DB15 to BNC pigtail Cable include)
16x RJ45
Refer to ‘Table-1’ and ‘Table-2’ below
Power Output
Compatible Video Format
Signal Transmission Band
12~15V DC Total <100W (each port <12W)
HD TVI, HD CVI, AHD / PAL, NTSC, SECAM
0~70MHz
Anti-interference
Coaxial Video Connector Surge
UTP Cable Communication
Connector Surge Protection
>60dB
2KV per：IEC61000-4-5
2KV (different mode) ; 4KV (common mode)
per:IEC61000-4-5
Contact Discharge: 6000V ; Air Discharge: 8000V
Per: IEC61000-4-2 1995
-10°C~50°C / 14°F~122°F
-40°C~85°C / -40°F~185°F
0~95%
310 x 232 x 45 mm / 12.2 x 9.1 x 1.78 inches
Iron Metal and Plastic
Black
1.76 kg / 3.88 lbs
ESD
Operation Environment
Physical Properties
Operation Temperature
Storage Temperature
Humidity
Dimension (L x W x H)
Housing Material
Color
Net Weight
*Specifications are subject to change without notice
Copyright © 2015 AAS Technology
www.AAS.com.tw
2
AH-13K
R201508-V17