Download OPERATION MANUAL
Transcript
Appendix N 3Z4L Laser Micrometer Protocol • DIP Switch 3 No. 1 Setting Setting of measurement function by 2 measurement instruments 2 3 Status ON/OFF ON/OFF ON/OFF 4 ON/OFF 5 Error data exclusion function ON/OFF 6 Multistep selection function ON/OFF This protocol does not support the error data exclusion function 3Z4L-4000 Series • DIP Switch 1 No. 1 Setting Baud rate 2 Status ON/OFF ON/OFF 3 Hand-shake procedure 4 Delimiter 5 ON/OFF ON/OFF ON/OFF 6 RS-232C interface use selection 7 8 ON/OFF ON/OFF ON/OFF • DIP Switch 2 No. 1 2 Setting Selection for measurement section 3 ON/OFF ON/OFF ON/OFF Setting of minimum read value ON/OFF 7 Display unit ON/OFF 8 External command setting ON/OFF 6 Set these settings according to the sensor connected. ON/OFF 4 5 Status ON/OFF Set these settings for 4 digits in the decimal portion. 637
Related documents
SYSMAC CS/CJ Series Serial Communications Boards and
SYSMAC CS/CJ/CP Series SYSMAC One NSJ Series
ES1B Datasheet - uwe electronic GmbH
SYSMAC CS/CJ/CP Series SYSMAC One NSJ Series
取扱説明書
取扱説明書
C200HW-COM01 C200HW-COM02-V1 to C200HW-COM06-EV1
"user manual"
shopping points - Caesars Entertainment
Manual del operador
1 INVESTIGATION OF THE RESPONSE OF NIMH
BEAM XR 200 - PR Lighting