Download this file

VOICE RECORDER FUNCTIONS
7
■ Recording a message for transmit
D Recording
To transmit a message using a voice recorder, record
the desired message in advance as described below.
q Select S-1.
Z(MENU/GRP)] to select the
w Push [F-1 VO ] then [Z
voice root menu.
• If the voice root menu appears, skip the pushing
Z(MENU/GRP)]. The voice starting menu can be
[Z
changed in the miscellaneous (others) set mode. (p.
134)
[MENU/GRP] [F-1] [F-3]
e Push [F-3 MIC ] to select the voice memory
recording mode.
Y(MENU/GRP)] then rotate [DIAL] to adjust
r Push [Y
REC LEVEL” inthe mic gain control so that the “R
dicator reads within maximum.
• Speak into the microphone without pushing [PTT].
• Push [F-4 DEF] to select the default mic gain.
Z(MENU/GRP)] to exit the mic gain adjustment
• Push [Z
condition.
t Push [F-1 ≤≥] to select the desired memory channel, then push and hold [F-3 REC ] for 1 sec. to
start recording.
• Speak into the microphone without pushing [PTT].
• Previously recorded contents are cleared.
7
Z(MENU/GRP)]) to
y Push [F-3 REC] again (or push [Z
stop recording.
• Recording is automatically terminated when the total
time of recorded messages, T1–T4, becomes 90 sec.
Z(MENU/GRP)] twice to exit the voice memu Push [Z
ory screen.
D Confirming/Erasing the recorded message
• Playing the recorded contents
• Erasing the recoded contents
q Call up the voice memory recording mode as described in steps q to e as shown above.
w Push [F-1 ≤≥] to select the desired memory channel, then push [F-2 PLY] to start playback.
q Call up the voice memory recording mode as described in steps q to e as shown above.
w Push [F-1 ≤≥] to select the desired memory channel to be erased, push [F-2 PLY] to start playback.
•“
” appears.
e Push [F-2 PLY] again to stop playback, if desired.
Z(MENU/GRP)] twice to exit the voice memr Push [Z
ory mode
•“
” appears.
e Push and hold [F-4 CLR] for 1 sec. to erase the
contents.
Z(MENU/GRP)] twice to exit the voice memr Push [Z
ory mode.
96