1
Download Specification Sheet
Transcript
Hardware Structure The figure below is an outline of the adaptor. 1 Power LED 5 Slide switch 2 Data LED 6 Mini USB connector 3 Link LED 7 Reset button 4 RS232 connector 8 Antenna connector Reset Button By pressing the Reset Button you can: Disconnect or reconnect a wireless connection (after a short press) Restore the factory settings (after a 3 seconds press) Slide Switch The slide switch can swap TXD/RXD and RTS/CTS signals. By changing the position of this switch you can set the adaptor as a DTE (towards antenna connector) or DCE (towards RS232 connector). Packaging Bluetooth Serial Adapter DB9 male to female converter USB cable for power supply DC adapter 2Dbi Antenna User Manual Contact LM Technologies Ltd Unit 19, Spectrum House 32-34 Gordon House Road London NW5 1LP, U.K. LM058 RS232-Bluetooth Adapter Page 2 of 2 Tel : +44 (0) 207 428 2647 Fax: +44 (0) 870 112 7636 +44(0)207 428 2647 | www.lm-technologies.com | [email protected]
