Download "user manual"

Transcript
2
Getting Started with the TDS1000 and TDS2000 Series Oscilloscopes
Square Wave or Pulses
The oscilloscope displays the following options when a
square wave or a signal similar to it is detected by the
Autoset function. These options are shown in
Figure 2.27.
Figure 2.27: AUTOSET options for square waves
2-92
Menu
Option
Description
Multi-cycle
square
You use this menu option to display
several cycles with appropriate vertical
and horizontal scaling. The oscilloscope
displays Mean, Frequency, Period, and
Peak-to-Peak automatic measurements.
TDS1000 and TDS2000 Series Oscilloscopes – Operator Training Kit