1
Download "user manual"
Transcript
6 Using Menu Function Controls 3. On the top of the front panel, push the DEFAULT SETUP menu button. 4. On the top of the front panel, push the AUTOSET button. 5. In the VERTICAL section, push the CH1 MENU button. 6. Push the appropriate side-screen menu button to select Volts/Div Fine. 7. In the VERTICAL section, turn the CH1 VOLTS/DIV knob counterclockwise to set CH1 for 256mV on the display. 8. On the top of the front panel, push the CURSOR menu button. 9. Push the appropriate side-screen menu button to select Type Voltage. TDS1000 and TDS2000 Series Oscilloscopes – Operator Training Kit 6-43
