Download VIN-11c - Sams elektronik doo

Transcript
Z10-3 edition 1
ENGLISH
Code: 004.102
VIN-11c
CVBS logo inserter
USER MANUAL FOR USE AND MAINTENANCE
Read the instructions before using the device.
Keep this manual for periodic usage.
Sams elektronik d.o.o.
48 Zivka Davidovica st.
11050 Belgrade
Serbia
Tel/Fax: +381 11 3806 253
+381 11 2402 212
[email protected]
www.sams.rs
Copyright © 1999 - 2014 Sams elektronik d.o.o.
Published: 15. may 2013.
Updated: 05. november 2014.
Inserters
elektronik
WARRANTY
Dear User,
Thank you very much for purchasing our product.
Your purchase is a wise investment. The equipment you have purchased is manufactured with great care from
high-quality parts and materials. It is designed to fully meet the needs according to specifications, if properly
installed, used and maintained according to the enclosed instructions.
Any technical failure or deficiency that occurs during the warranty period specified on the invoice of the
purchased equipment will be inspected and serviced by Sams elektronik doo or an authorized service center of
the manufacturer, with the conditions set out in the warranty statement.
THIS DEVICE IS INTENDED FOR PROFESSIONAL USE.
WARRANTY STATEMENT
1.
2.
3.
4.
5.
6.
7.
Product has declared characteristics. Within the warranty period, manufacturer ensures the removal of
technical failures, product defects or replacement of products if declared characteristics of the product are
changed.
If the goods are not delivered as specified with the contract, the consumer has the right to request from the
manufacturer / service provider to eliminate the lack of conformity, without charge, repair or replacement,
or to request an appropriate price reduction or terminate the contract.
Any repair or replacement must be made within a reasonable time without significant inconvenience to
the consumer, taking into account the nature and the purpose for which the consumer has purchased the
product.
The consumer has the right to terminate the contract, if he can realize the right to repair or replacement,
or if the manufacturer / servicer has not completed repair or replacement within a reasonable time or if
the manufacturer / servicer did not perform repair or replacement without significant inconvenience to the
consumer.
The consumer may not terminate the contract if the lack of conformity of the product is negligible.
The product will function properly when used in accordance with the user manual.
Period of servicing the product is 6 years from the launch on the market.
The product purchased outside the territory of Serbia does not fall under the terms of this warranty, only to 1
year factory warranty from date of purchase.
TERMS OF WARRANTY
1.
2.
3.
The warranty period begins on the date of sale referred in the invoice.
The buyer loses the right to warranty if the defect cause failure from not following the user manual
instructions, improper installation, comes to mechanical damage during use, repairs and modifications by
unauthorized persons, installation of non-genuine spare parts, and if the buyer does not comply with all
warnings listed in the user manual.
The warranty is voided if the device is damaged during the disturbances from the environment, natural
disasters (floods, hail, etc.), suffered an electric shock or lightning strike.
IMPORTANT NOTES
1.
2.
3.
4.
2
Be sure to thoroughly read the user manual.
If you have any doubts about the instructions, contact the technical support of the manufacturer.
Before contacting for technical help, please make sure that are provided with all necessary conditions for
normal operation.
If the malfunction or defect in the device does not eliminate within a reasonable time from the date of
failure, the warranty period shall be extended for as many days as the unit is in service.
For all maintenance interventions shall solely be authorized services listed in this Warranty Certificate.
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN
Inserters
elektronik
SAFETY WARNINGS
UPOZORENJE
RIZIK OD S TRUJNOG UDARA
NE O TVARATI
DOK JE P OD N APONOM
CAUTION
ELECTRICAL SHOCK HAZARD
DO N OT O PEN
IMPORTANT SAFEY
WARNING
TO AVOID RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THE UNIT TO MOISTURE OR RAIN
The symbol “lightning in a triangle” is to alert the user to the presence of
high voltage. In poor conditions the user may be exposed to shock.
The symbol “exclamation mark in a triangle” is to alert the user to comply by
the terms of use in user’s manual, which is supplied with the device.
CLASS I DEVICE
Grounding is connected to the chassis of the device.
The power supply is protected with fuse against overload.
VIN
Sams elektronik d.o.o. • [email protected] • www.sams.rs
3
Inserters
elektronik
WARNING
TO AVOID ELECTRIC SHOCK, DO NOT OPEN COVER.
DEVICE MAINTENANCE REQUIRES PROFESSIONAL PERSON AUTHORIZED BY THE MANUFACTURER.
1. Read all safety and operating instructions before using the device.
2. Keep all safety and operating instructions.
3. Follow the instructions from the user manual.
4. Do not upgrade device, except in the case advised by the manufacturer.
5. Do not use the device in the presence of water and / or moisture.
6. Do not pour water or moisten the device with any type of liquid.
7. Openings on device are provided for ventilation.
8. Do not block air flow through the ventilation openings.
9. This product is powered by AC ~ 230V ± 10%, 50Hz.
10. This product is equipped with a three-wire cord with grounding.
11. This device is equipped with a protective fuse in the power outlet. Do not bypass fuse.
12. Do not replace the fuse. Replacement can be made by a person authorized by the manufacturer.
13. Do not bend the power cord so that it can be damaged.
14. Connect connectors as in the enclosed instructions. Deviations from the allowed values predicted
for the inputs and outputs of the device can cause severe damage and warranty void.
15. Do not use the device in an environment that contains flammable or explosive materials in any
physical state.
16. Turn off the power corde before cleaning. Do not use liquid, aerosol or flammable cleaners. Use
only a dry cloth.
17. Servicing is performed by a qualified person. Removing the cover user is exposed to high
voltages.
18. Never use the device when the cover is open and the device is powered on.
19. Do not expose to extreme high or low temperatures.
20. Do not expose to sudden temperature changes.
21. Call service in the following cases:
- The power cord or plug is damaged
- Liquid or foreign objects is inside the device
- The machine is exposed to water and moisture
- The device does not function according to specification
- The unit has been dropped or damaged
- The characteristics are significantly changed
22. Use only specified replacement parts.
23. Professional person authorized by the manufacturer must check the device after completion of
service.
24. Allow a free rack unit (1RU) above and below the device for ventilation or put rack fan under the
device.
Pictures and drawings listed in this user manual are for information purposes only and may differ
from the actual device. Design and specifications of the device may change without prior notice.
TECHNICAL SUPPORT AND SERVICE
Sams elektronik has made every effort to ensure that the equipment works in perfect condition. In
the event that problems that occur can not be resolved, or if you have any questions regarding this
equipment or information about other products produced from Sams elektronik, contact your local sales
representative or call Sams elektronik directly through one of the ways listed below:
Sales: +381 11 3806 254
Technical support: +381 11 2402 212
Service: +381 11 4056 051
Email:
Sales - [email protected]
Technical support and service - [email protected]
Web site: www.sams.rs
Address:
SAMS ELEKTRONIK d.o.o.
48 Zivka Davidovica st
11050 Belgrade
Serbia
4
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN
Inserters
elektronik
TABLE OF CONTENTS
Description
Page
UNPACKING AND INSTALLATION.....................................................................................6
MAINTENANCE...............................................................................................................6
REMOVAL AND STORAGE................................................................................................6
DESCRIPTION................................................................................................................7
INSTALLATION...............................................................................................................8
FUNCTIONS...................................................................................................................8
BLOCK DIAGRAM...........................................................................................................9
NETWORK SETUP...........................................................................................................10
NETWORK ACCESS AND DEVICE CONTROL......................................................................10
PLAYLIST SELECTION.....................................................................................................11
LOGO CONTROL............................................................................................................11
LOGO POSITION............................................................................................................12
IMAGE PREPARATION FOR INSERTING............................................................................12
PREPARATION OF THE LOGO..........................................................................................12
PAY ATTENTION BEFORE INSERTING LOGO.....................................................................15
SOFTWARE....................................................................................................................16
REMOTE CONTROL........................................................................................................17
JOINT CONTROL OF INSERTERS.....................................................................................18
LCD TOUCH SCREEN - DESCRIPTION..............................................................................19
STATUS OF DEVICE........................................................................................................19
MACRO STATUS.............................................................................................................19
MACRO CONFIGURATION...............................................................................................20
GET LOGO.....................................................................................................................20
ADJUST LOGO LEVEL.....................................................................................................21
ADJUST HV POSITION....................................................................................................22
EDIT GPI.......................................................................................................................22
MACRO EDIT.................................................................................................................22
PLAY LIST......................................................................................................................23
LOGO POSITION............................................................................................................24
LOGO LEVEL..................................................................................................................24
FADE IN TIME................................................................................................................24
ADVANCED SETTINGS....................................................................................................25
SC PHASE......................................................................................................................25
H PHASE........................................................................................................................25
SOFTWARE SUPPORT.....................................................................................................26
FRAMING.......................................................................................................................26
PROBLEMS AND SOLUTIONS IN A NETWORK ENVIRONMENT...........................................28
CABLE WIRING BETWEEN DEVICE AND REMOTE CONTROL..............................................30
CABLE WIRING FOR CONNECTION TO PC........................................................................30
CABLE WIRING BETWEEN THE LOGO INSERTER AND DigiTIM-1....................................... 30
GPI / TALLY PINOUT.......................................................................................................30
NOTES..........................................................................................................................31
VIN
Sams elektronik d.o.o. • [email protected] • www.sams.rs
5
Inserters
elektronik
UNPACKING AND INSTALLATION
The box contains:
- Device
- Power corde
- User manual (optional)
Before use, check the contents of the box. For any deficiency report to the seller or the manufacturer
of the product.
DEVICE IS INSULATED BY PROTECTIVE WRAP AND PACKED IN A CARDBOARD BOX.
DEVICE IS SENSITIVE TO SHAKES AND DROPS. HANDLE WITH CARE DURING TRANSPORT
AND ASSEMBLY.
Check if the product is damaged during transport.
PROCEDURES FOR SAFE USE OF THE DEVICE:
1.
2.
3.
4.
- Remove the protective wrap from the chassis.
- For devices that are AC 230V / 50Hz powered, the device is supplied with power cord.
- Use only power corde that comes with the device.
Device is mounted in a 19“ special-purpose rack cabinets designed for this type of device. Screw
device with four screws. Screws for fastening are not supplied with the device.
The device must be connected to ground. A device that is not connected to the grounding does
not function properly according to factory declarations and can cause adverse effects on users and
other equipment.
Strictly comply to all steps for proper connection of devices in the system.
Places for fastening
MAINTENANCE
The system maintains only person authorized by Sams elektronik
doo.
Any voluntarily opening device, upgrading or servicing is strictly
prohibited and is subject to warranty void, and the possibility of
injury.
REMOVAL AND STORAGE
1.
2.
3.
4.
5.
6
Before dismantling the device, switch off the power, remove
the power cord and remove all other connectors.
Remove the four screws for fastening.
Remove the device from rack cabinet.
Wrap the machine in the foil to protect it from dust. Package
it in a box.
The device must be stored in a room without moisture.
Illustration - mounted device
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN
Inserters
elektronik
INSERTERS
DESCRIPTION
VIN-11c
CVBS motion logo inserter
-
Power off / unit fail program video bypass relay
High quality (10/21 bit)
Programable hard or transparent key capability
All four corner display capability
Suport up to 229 independents logos
Flash memory allows instant reprogrammability
Analog preview output
7 preset animations
Remote control panel with LCD touch screen
Control of device via network trought web browser
GPI control and TALY
The VIN-11c is device witch stores and recalls up to 229 individual, dynamically positionable logos to multiformat analog program signal. It
supports real-time play back of video, and can store animated logos lasting up to 9 seconds. Inserter stores full bandwidth logos in high density
flash memory that allows instant in-circuit reprogrammability. Logos sizes are 1/9th screen size (256x128 pixel). The device have 7 independently
direct access logo settings (macro’s). Every macro consist of a 230 steps deep play list and and several programable settings. Every step in a play
list contains information of currently displayed frame and step duration time (from 1 frame to 40 minutes adjustable). Play list can be programmed
to run animation once or to make a loop or to make static logo. Programmable setting per each macro are: transparency, fade-in time and position
information for all four corners. Device can be controled with LCD touch screen remote control, via network trought web browser on any OS or
trough GPI control switch. Advanced users can create custom applications for controling of device in playout sistems or some remote programming
by sending special instructions. The device can be linked with DigiTIM-1 for some joint functions, like ON/OFF and corner position. To protected
your program signal against failure or power interruptions, a built-in bypass relay routes the program input signal to the output (only for CVBS)
for uninterrupted operation. Pictures are uploaded with included Image Uploader Software for PC or compatible. The device accepts Windows®
8-bit bitmap format.
front side
• Sams elektronik d.o.o. • 48 Zivka Davidovica st. • 11050 Belgrade • Serbia •
• +381 11 3806 253; +381 11 2402 212 • [email protected] • www.sams.rs •
rear side
TECHNICAL SPECIFICATIONS
GENERAL INFORMATION
-
Code: ............................................................................... 004.102
Weight: ................................................................................. 2 Kg
Type: .................................................................... 1RU rack frame
Dimensions: ....................................................1RU x 19” x 150mm
Required: .............................................remote control IR-1 (IR-1a)
Delivery includes:.........................device, power corde, user manual
ANALOG INPUT
- Number:.............................................1, BNC female (relay bypass)
- Signal type: .......................................................................... CVBS
- Impedance: ............................................................................ 75Ω
ANALOG OUTPUT
- Number:.................................................................. 1, BNC female
- Signal type: .......................................................................... CVBS
- Impedance: ............................................................................ 75Ω
MONITORING OUTPUT
- Number:.................................................................. 1, BNC female
- Signal tpe: ............................................................................ CVBS
- Impedance: ............................................................................ 75Ω
REFERENCE INPUT
- Analog BB 300 mV: .................................................. 1, BNC female
Specifications and designs are subject to change without notice
TCP/IP
- Number:............................................................................ 1, RJ45
GPI INPUT
- Number:....................................................... 2, 5-pin terminal strip
- Function: ..............................Logo on/off, position, programmable...
TALLY
- Number:....................................................... 2, 5-pin terminal strip
- Function-indication:..................... Logo on/off, program input on/off
RS-232
- Number:.......................................................... 1, 9P SUB D female
- Function: ..................................................................Image upload
PERFORMANCE
-
Bit Resolution: ....................................10 bit extended, 21 bit mixer
Signal to Noise: ....................................................................60 dB
Black offset: ............................................................. Self adjusting
H adjustment range: ...........................................0-128 (37ns step)
SC range: ........................................................................... 0-360°
POWER
-
Voltage: .............................................................~230V AC ± 10%
Power: .................................................................................. 30W
Frequency: ............................................................................50Hz
Overload protection: ..........................front Mounted Circuit Breaker
TEMPERATURE
- Performance: ......................................................................5-40°C
- Operating: ..........................................................................0-50°C
ORDERING INFORMATION
Code
Name
004.102 VIN-11c
Description
CVBS logo inserter
IV
4
VIN
Sams elektronik d.o.o. • [email protected]s.rs • www.sams.rs
7
Inserters
elektronik
INSTALLATION
3
Connect the power cord.
The device works only on AC ~ 230 V / 50 Hz.
REMOTE
PC
NETWORK
INPUT
INPUT
OUTPUT
PREVIEW
EXTERNAL
TCP/IP
GPI
PROGRAM
PROGRAM
PROGRAM
REFERENCE
AC ~230V/50Hz
SN:
www.sams.rs
Made in Serbia
VIN-11c
POWER
USE ONLY WITH A 250V FUSE
FUSE: 500mA
Rear side
Connect all necessary connectors
before the unit is turned on.
1
INPUT
INPUT
OUTPUT
PREVIEW
EXTERNAL
TCP/IP
GPI
PROGRAM
PROGRAM
PROGRAM
REFERENCE
Input
NETWORK
Preview
PC
Turn on the device
by pressing the switch.
Output
REMOTE
2
Connector for connection
to the remote control
(be sure to connect
remote control
before power switch
is pressed)
GPI
Connect the device
to the video mixer
Connector for connection to a PC
(RS-232)
TCP-IP
Connect the device to the local network.
Yellow LED lights up when
the cable is connected.
Green LED flashes
in communication with the device.
External reference input
Device supports signal generator
(like Sams MSG-2).
M
/I
P
C
G
P
R
G
TC
P
M
T
P
I
R
E
F
P
NOTE
Presence of external
reference is mandatory!
Analog motion logo generator inserter
VIN-11c
www.sams.rs
Front side
4
If everything is OK, LEDs will illuminate
(depending on settings)
For best signal quality, use:
- Belden 8281 coaxial cable for analog video
M
R
P
G
F
G
E
R
M
T
P
I
P
C
TC
P
/I
P
FUNCTIONS
1
2
3
4
5
6
When device is ON:
1.
2.
3.
4.
5.
6.
8
TCP/IP (red LED) - LED flashes when in communication with the device.
PC (red LED) - when you put images into the device, the LED lights up, otherwise it is OFF.
RMT (red LED) - when connected to a remote control, the LED lights up, otherwise it is OFF.
GPI (red LED) - if the GPI cable is connected, the LED lights up, otherwise it is OFF.
REF (yellow LED) - if the reference cable is plugged in, LED lights up, otherwise it is OFF.
PGM (green LED) - if the PGM cable is connected, the LED lights up, otherwise it is OFF.
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN
Inserters
elektronik
BLOCK DIAGRAM
REMOTE CONTROL
KEYPAD LEDS
CPU
LCD
RS 485
TP
RS CPU
CONTROL & LOGO UPLOAD
PC
CABLE
PC, MAC, SUN,
LINUX, OS/2,
PALM, MOBILE...
CVBS PV OUT
CONTROL &
PROGRAMING
TCP IP
ANALOG
IN
BB REF
CVBS
ANALOG
OUT
CVBS
CVBS
only
SC
PHASE
RS 485
RS 232
WEB SERVER
REF IN
GENLOCK
D/A
Color
processing DNR
12/10 bit
A/D
D/A
FADER
GPI A
GPI B
CPU
CPU
FLASH
TALLY logo on
SD RAM
LOGO
FILL
KEY
MIXER
LOGO STORE
FLASH
VIN-11c
TALLY no signal
VIN
Sams elektronik d.o.o. • [email protected] • www.sams.rs
9
Inserters
elektronik
NETWORK SETUP
To change the settings, consult your network administrator.
The default IP address is 192.168.0.200. If there is a DHCP server, the device will be assigned a new
address.
If there is a problem with connecting the device, check the firewall and allow UDP port 3040.
NETWORK ACCESS AND DEVICE CONTROL
The device can be configured through the web browser. First, the device must be found in the local
network. To do this, start the Sams Netfinder software double clicking on the icon. The software first
scans for devices.
Sams Netfinder: scan for devices
When the search is completed, a new window will open showing found devices.
Sams Netfinder: found devices
Click on the desired device and press the “Web Browser” located on the left side of the software.
Browser will display the configuration options.
NOTE:
The device will be found from across the network only if the device was connected to a network cable
before turning on.
If the program NETFINDER does not find the device on the network, try the following:
- Connect the inserter directly to the computer;
- The computer set with fixed IP address, as follows:
IP ADDRESS 192.168.0.15
SUBMASK IP 255.255.255.0
IP GATEWAY left blank;
- Set REPAIR network card, in order to fully accept the new settings (alternatively RELEASE / RENEW
scenario);
- Try NETFINDER;
- The device must be seen;
- Write down the MAC ADDRESS and consult with the network administrator.
NOTE:
Do not use simultaneously with multiple places control over the network!
Just enter the correct value in the permitted range.
The manufacturer does not guarantee the validity of the results of irresponsible use of the device.
10
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN
Inserters
elektronik
After a few seconds, the page will open.
Web browser: configuration
At the bottom of the page, you can see the status of the device.
PGM - Programming Input: If it’s green, it’s OK. If it is red, check cable or video source.
REF: if it is green, everything is OK. If it is red, check cable or reference source.
Device status is updated every 0.5 seconds.
PLAYLIST SELECTION
This is the option to select a preconfigured macros. By clicking on one of seven buttons, selected
will turn green. Selected macro can be seen even if it is changed from another computer or a remote
control.
LOGO CONTROL
This option includes:
- LOGO ON / OFF buttons - to control when the logo will appear on / off in the program signal.
- GET LOGO - select the logo that will be displayed in the program signal. Selecting this option turns
off the macro. The value is entered in the box next to the button, after which it is necessary to click
with mouse button (do nor press ENTER/RETURN).
- FADE IN - this option sets the effect of appearance of logo after pressing LOGO ON button. The
values are entered in the tenth of a second (1 sec = 10), and the maximum time is 25 seconds (250).
The value is entered in the box next to the button, after which it is necessary to click with mouse
button (do nor press ENTER/RETURN).
- Transparency - this option sets the level of transparency of logo. The value is within the range of 0
to 100. The value is entered in the box next to the button, after which it is necessary to click with
mouse button (do nor press ENTER/RETURN).
VIN
Sams elektronik d.o.o. • [email protected] • www.sams.rs
11
Inserters
elektronik
SOFTWARE BUGs:
By selecting images in the Get LOGO, it is not possible later to return to the old macro. The only
solution is to choose another macro and then to return to the previous.
LOGO POSITION
This option includes:
- SELECT CORNER - this option controls in which corner of the screen will be the inserted logo
- PLACE SELECTION - this option controls the place of the inserted logo by control buttons up-downleft-right.
- H-POSITION - This option controls the horizontal position of the logo by entering values. The value
is entered in the box next to the button, after which it is necessary to click with mouse button (do
nor press ENTER/RETURN).
- V-POSITION - This option controls the vertical position of the inserted image by entering values. The
value is entered in the box next to the button, after which it is necessary to click with mouse button
(do nor press ENTER/RETURN).
IMAGE PREPARATION FOR INSERTING
General rules:
1. The logo is preparing an application Adobe® Photoshop®.
2. The image size is 256x128px.
3. The logo is made in the RGB color palette.
4. he final version of the logo is converted to an 8-bit palette (Indexed colors).
6. The final version of the character is saved as BMP.
PREPARATION OF THE LOGO
The sign is (in principle) prepared in two ways. The rule, which is used depends mainly on ways how
logo was created.
1. Logo preparation in application Photoshop® (raster logo) requires that the logo must be originally
made for the size of the preparations for the inserter (we do not recommend this method):
- Open a new document sized 256x128px, 300dpi, transparent background.
- Open raster logo. The sign can not be scaled. It will lose quality.
- Position the logo in the middle.
- Convert to 8-bit palette (Indexed colors)
- Select logo (Ctrl+click on layer) -> Meni: SELECT -> INVERSE (Shift+Ctrl+I)
- Paint background in BLACK (R:0 G:0 B: 0)
- Save As BMP.
2. Logo preparation in application Photoshop® (vector logo):
(This variant is the most common and recommended as preparation)
- Open a new document sized 256x128px, 300dpi, transparent background.
- Open vector logo (Adobe Illustrator) in Photoshop®.
- Rasterize Generic PDF Format: Height: approximately 40-60px, resolution 300dpi, Mode: RGB,
Anti-aliased: on/off (this option gives different results, and allowed the user to decide which to use),
Constrain Proportions: ON -> OK.
- Transver logo to preparation window. Position the logo in the middle.
- Convert to 8-bit palette (Indexed colors)
- Select logo (Ctrl+click on layer) -> Meni: SELECT -> INVERSE (Shift+Ctrl+I)
- Paint background in BLACK (R:0 G:0 B: 0)
- Save As BMP.
12
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN
Inserters
elektronik
Picture 2
Logo on picture 2 is 40px height. In this case, the logo was in the vector format. Convert logo in 8-bit
color palette – Indexed colors (Picture 3).
Picture 3
Next, it will open Indexed Color options. On picture 4 are displayed setting. Select „Local (Selective)“
Palette. The most important thing is that to select an option Black and White in settings „Forced“. In
this way BLACK will be the key.
Picture 4
Logo edges will be without Anti-aliasing. Select layer (Ctrl+click on layer) -> Meni: SELECT -> INVERSE
(Shift+Ctrl+I)
VIN
Sams elektronik d.o.o. • [email protected] • www.sams.rs
13
Inserters
elektronik
Picture 5 - Selected layer
Picture 6 - Inverse selection
Paint background in black (R:0 G:0 B:0) (Picture 7)
Save As BMP
Picture 7
In BMP options select Windows File format and 8 bit Depth. Click on OK.
14
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN
Inserters
elektronik
PAY ATTENTION BEFORE INSERTING LOGO
LOGO SIZE:
The most ideal logo size is 40-60px height (depending on the shape and proportions). Logo height / his
part necessarily have to be an even number in pixels. It is very important that the character would not
“flicker” on the screen.
SAVE AS BMP
Saving logo is the most important process. Be sure to check the background color after conversion to 8
bit color palette. The rule is that the background is marked as Index 0 (Idx: 0). You can check this by
placing MOVE TOOL over background. If the background is at as shown in Picture 8, the preparation is
successful. It is recommended that the name of the image is no larger than 8 characters written in small
letters, in order to fully display name on the remote control and in order to prevent any system errors
caused by the inability to display certain characters.
Picture 8
NOTES:
Due to differences in the algorithm, for certain types of logos it is recommended to:
- Open prepared BMP file in the program Microsoft® PAINT
- Save As and overwrite an opened file.
If the appearance of the logo is not satisfactory:
- On left and right edges appears green and magenta - Change Aspect Ratio to 1.09 or change the width
of 2px.
- Parts of logo “flicker” - correct logo in the parts that height have an odd number of pixels.
VIN
Sams elektronik d.o.o. • [email protected] • www.sams.rs
15
Inserters
elektronik
SOFTWARE
INSTALLATION
- Start SETUP.exe from installation disc
- Follow instructions due installation.
CONFIGURATION
- OS Windows®
- VGA: 1024x768px
- 15” moniotor
- Pentium or compatible processor
- COM port that can support boud rate 38400.
2
3
4
5
1
15
6
14
7
8
13
12
11
10
9
SOFTWARE
1. Exit from software
2. Selection of COM port
3. List of files in a folder
4. > Add selected images
>> Adding all of the images in folder
< Rejection of selected image
<< Rejection all images
5. List of selected images
6. Button to start inserting pictures in the inserter
7. Preview of selected image
8. Stopping the process of inserting images in the inserter
9. Expected time for finalization
10. Name of the image that is uploading
11. Images position in list
12. Information of uploading
13. Progress bar
14. Preview of uploaded image
15. Location in disc drive
After selecting the folder, select the image you want to upload in the inserter. If you want more images
at once use the CTRL key to select individual or SHIFT for group of images. After selecting press “>”. If
you want all images in the folder to add click on the button “>>”. After that, the software will ask from
16
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN
Inserters
elektronik
which number you want to upload images. If the inserter have pre-uploaded images, this can be useful,
in order to avoid numbers of this images (unless if you want to overwrite them). After prepared image
list, press the “UPLOAD FRAME(S)”. Images will then start to be uploaded into the inserter. One image
takes about 23 seconds to be uploaded into the inserter.
NOTES:
- To make the device function properly, presence of external reference is mandatory.
- Do not upload images in the inserter immediately after turn on. Wait for it to finish initializing for
up to 2 minutes.
- Make sure that the inserter during images upload does not turn off.
- Not recommended that the first letter of image name is the capital letters: L, C and R.
- Maximum number of uploaded images which can store is 229.
- Maximum number of uploads is 20.000, whether it is a single image or all 299.
- If it happens that the logo does not meet the quality or have some artifacts, reuplad the same
with the exact number as the previous one.
- BEFORE UPLOADING LOGO(S) INTO INSERTER UNPLUG TCP-IP CABLE FROM THE DEVICE!
- DURING UPLOADING LOGO(S) IN INSERTER, STOP ALL OPERATIONS THAT MAY AFFECT THE
EXECUTABLE FUNCTIONS OF THE DEVICE!
- After the device is switched off, and then on, the system initializes about 2 minutes. During this
period, the logos on the program output are not present, but loaded logos will be available on a
“preview” output.
REMOTE CONTROL
1
Rear side
test_001
test_001
test_001
test_001
Inserter
Status
PGM Ok
Ref Ok
Step:
0
Logo:
0
test_001
HoldTime
00:00.00
H.Pos: 25
V.Pos: 40
LogoLvl: 80
test_001
LOCK
test_001
test_001
Menu
ON
POSITION
LOGO
OFF
Remote control panel for inserters
Front side
IR-1
www.sams.rs
3
test_001
2
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
Inserter
Status
Inserter
PGM Ok
Status
Inserter
Ref Ok
PGM
Ok
Status
Step:
Ref Ok
Ok0
PGM
Logo:
0
Step:
Ref Ok0
test_001
Logo:
0
Step:
HoldTime0
test_001
Logo:
00:00.000
HoldTime
test_001
H.Pos:
25
00:00.00
HoldTime
V.Pos:
40
H.Pos:
25
00:00.00
LogoLvl:
80
V.Pos: 25
40
H.Pos:
V.Pos: 40
LogoLvl:
80
test_001
test_001
test_001
test_001
LOCK
LOCK
LOCK
test_001
test_001
test_001
test_001
test_001
Menu
Menu
Menu
LogoLvl: 80
ON
ON
ON
POSITION
LOGO
POSITION
POSITION
LOGO
LOGO
OFF
OFF
OFF
Inserter
Status
PGM Ok
Ref Ok
Step:
0
Logo:
0
test_001
HoldTime
00:00.00
H.Pos: 25
V.Pos: 40
LogoLvl: 80
test_001
4
LOCK
test_001
test_001
Menu
ON
POSITION
LOGO
OFF
5
REMOTE CONTROL
1. 9-pin connector for connection with inserter
2. LCD touch screen
3. Panel lock key. After pressing this key, LCD screen turn off. To turn on again, press again
LOCK key.
4. Corner position keys. Each key calls the recorded position of the corresponding macro.
5. Keys for ON/OFF logo in program.
ON - to activate the logo in program with defined FADE IN time.
OFF - turn off logo from program
Remote control panel for inserters
Remote control panel for inserters
Remote control panel for inserters
VIN-11R
www.sams.rs
VIN-11RR
www.sams.rs
VIN-11
www.sams.rs
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
Inserter
Inserter
Status
Inserter
Status
PGM
Ok
Status
PGM
Ref Ok
PGM Ok
Ok
Ref
Step:
0
Ref Ok
Step:
0
Logo:
Step:
0
Logo:
test_0010
Logo:
0
test_001
HoldTime
test_001
HoldTime
00:00.00
HoldTime
00:00.00
H.Pos:
25
00:00.00
H.Pos:
V.Pos: 25
40
H.Pos: 40
25
V.Pos:
LogoLvl:
80
V.Pos: 40
LogoLvl: 80
LogoLvl: 80
test_001
test_001
test_001
LOCK
LOCK
LOCK
test_001
test_001
test_001
test_001
test_001
test_001
VIN
Menu
Menu
Menu
ON
ON
ON
POSITION
POSITION
LOGO
POSITION
LOGO
LOGO
OFF
OFF
OFF
Sams elektronik d.o.o. • [email protected] • www.sams.rs
17
Inserters
elektronik
NOTE:
LCD screen is touch-sensitive. Take care during pressing on the screen. For pressing on the screen,
use only fingers.
Inadequate use of LCD touch screen is subject to warranty void.
MACRO
SELECT
5
6
3
1
4
ON
POSITION
LOGO
OFF
2
IR-1a
Remote control panel for inserters
www.sams.rs
MACRO
SELECT
5
6
3
1
MACRO
SELECT
5
6
3
1
4
ON
POSITION
LOGO2
OFF
4
ON
POSITION
LOGO
OFF
2
Version of remote control, without LCD display (IR-1a) has the option to choose the corner
and power on / off image. LOCK key in this version is called MACRO SELECT. By pressing
this button, you can select 6 macros. MACRO SELECT and active macro keys flashing. The
numbers next to the keys represent macro. Functions that are set via LCD screen, in this
version are set via web browser by sending commands.
JOINT CONTROL OF INSERTERS
Compatible devices can be connected via RS-232 connector.
In this way allows simultaneous switching from one corner to another and at the same time appear /
disappear. For easy reference, use the command IR-1d, which in 2RU panel has dual controls.
DigiVIN-1
test_001
test_001
test_001
test_001
Inserter
Status
PGM Ok
Ref Ok
Step:
0
Logo:
0
test_001
HoldTime
00:00.00
H.Pos: 25
V.Pos: 40
LogoLvl: 80
DigiTIM-1
test_001
LOCK
LOCK
test_001
LOGO/TIME
ON/OFF
test_001
Menu
ON
POSITION
LOGO
OFF
ON
POSITION
TIME
OFF
Dual remote control panel for inserters
IR-1d
www.sams.rs
18
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN
test_001
test_001
elektronik
test_001
Inserter
Status
PGM Ok
Ref Ok
Step:
0
Logo:
0
test_001
HoldTime
test_001
test_001
Inserters
test_001
00:00.00
LCD TOUCHH.Pos:
SCREEN
- DESCRIPTION
25
V.Pos: 40
During
the initialization
of the device Menu
(about 10 seconds) the display shows the manufacturer’s logo.
test_001
LogoLvl:
80 displays the 1
After initialization, the device
status and configuration macros.
test_001
test_001
test_001
test_001
Inserter
Status
PGM Ok
Ref Ok
Step:
0
Logo:
0
test_001
HoldTime
00:00.00
H.Pos: 25
V.Pos: 40
LogoLvl: 80
test_001
When it is not used, LCD screen turn off after 2 minutes.
To activate it, touch with finger anywhere on the
screen.
test_001
test_001
Menu
STATUS OF DEVICE
Menu
Device status in a simple way showing all the necessary information, such as:
SC Phase
- Status of the programming signal
“PGM” - if in this status writes OK, everything is fine, and if it writes
Macro
Get Logo
CVBS
ERROR, check the presence ofEdit
the program signal.
NOTE: Due0/to 0the loss of the program signal,
inserted logo will still be present on the background black. If a power is loss, relay protection will
Select
Adjust
override
the programming signal to the output without
interruption.
input
LogoLvl
7
8
9
- Status of the reference signal “REF” - if in this status writes OK, everything is fine, and if it writes
ERROR,
reference signal.
4
5
6
Adjust check the presence of a
Edit
HV Pos.
MACRO STATUS
Exit
GPI
Exit
CVBS&Y/C
Select
outpit
1
2
3
-
0
+
Exit
The device has seven configuration macros.
Each macro can define different style of inserted logo,
1
whether static or animated. Below the status of the program signal and the reference is printed
information of the status of the active macro.
Macro
Macro status describes:
Adjust
Edit
Pos. active frame of animation.
STEP - representsHV
currently
LOGO - represents the number of currently active image. These are numbers that are defined during the
HV in
Position
image uploading
the inserter. Below is the number of the currently active image.
PlayList
HOLD TIME - timeH:of25
active image. Time is reduced
to zero, after which the display prints time of the
V: 40
next step.
H. POS - represents the horizontal position of the currently
active macro. Values are changing in relation
Logo
Position
^
to the selected corner.
V. POS - represents the vertical position of the currently active macro. Values are changing in relation
<
>
Logo
to the selected corner.
Level
LOGO LVL - is the level of transparency of currently active macro.
^
Exit
1
PlayList
VIN
Show
Exit
1
FadeIn
Time
Exit
Logo
Position
Sams elektronik d.o.o. • [email protected] • www.sams.rs
19
V.Pos: DigiVIN-1
40
test_001
Menu
Status
test_001
test_001
LogoLvl: 80
1
SDI Ok
Ref Ok
Step:
0
test_001
test_001
DigiVIN-1
Logo:
0
Status
test_001
test_001
test_001
SDI Ok
Inserters test_001
test_001
Ref OkHoldTime
00:00.00
Step:
0
test_001
H.Pos: test_001
25
Logo:
0
V.Pos: 40
test_001
test_001
Menu
LogoLvl: 80
test_001
test_001
Press the HoldTime
button of the desired
macro and1 then
00:00.00
H.Pos: 25
V.Pos: DigiVIN-1
40
test_001
Menu
Status
test_001
test_001
LogoLvl: 80
SDI Ok
Ref Ok
0
Menu
includes: Step:
test_001
test_001
Logo:
0
Menu
test_001
test_001
V.Pos: 40
DigiVIN-1
Status
SDI Ok
Ref Ok
Step:
0
Logo:
0
test_001
test_001
test_001
MACRO CONFIGURATION
the MENU button.
test_001
test_001
DigiVIN
Status
SDI O
Ref O
Step:
test_001
Logo:
test_001
elektronik test_00
Menu
1
test_001
LogoLvl: 80
test_001
test_001
HoldTime
00:00.00
H.Pos: 25
V.Pos: 40
LogoLvl:
DigiVIN
Status
DigiVIN
SDI
O
Status
Ref O
O
SDI
Step:
Ref O
Logo:
Step:
test_00
Logo:
test_00
HoldTim
00:00.0
HoldTim
H.Pos:
00:00.0
V.Pos:
H.Pos:
V.Pos:
LogoLvl:
Menu
test_001
test_001
LogoLvl: 80
test_001
test_001
Menu
- GET LOGO - In active macro and already configured
HoldTime
test_001
test_001
animations temporarily
00:00.00 recall an image.
Macro
- ADJUST LOGO
LVL -25
Temporarily set the level of
H.Pos:
Get Logo
Edit
transparency. V.Pos: 40
test_001
Menu
LogoLvl:
80
- HV ADJUST POS
- Temporary
setting position of the
Adjust
LogoLvldisplayed image.
- MACRO EDIT - Configure active macro.
Adjust
- EDIT GPI - Configuration
for GPI.
Menu Edit
HV Pos.
- EXIT - Exits the menu. GPI
HoldTim
00:00.0
H.Pos:
V.Pos:
test_001
test_001
test_001
Macro
test_001
Edit
Get Logo
test_001
test_001
Adjust
LogoLvl
Adjust
HV Pos.
LogoLvl:
Edit
GPI
DigiVIN
Menu
Status
SDI O
Ref O
Step:
Logo:
test_00
test_001
Number
in the lower-right corner
of EXIT button ExitMacro
Get Logo
1Edit
represents the number of active
macro. The number
isAdjust
displayed in two ways:
-LogoLvl
Flashing background color - macro is active
Adjust
- Flashing
inverted - the Adjust
macro is not active. This
HV Pos.
LogoLvl
happens
temporary
adjustment:
Adjust when in macro set
Edit
HV Pos.
GPI
GET
LOGO, LOGO LVL ADJUST or
ADJUST HV POS.
9
5
6
2
3
xit0
1
^
<
Adjust
4
HV
Pos.
Get
Logo
5
6
1
2
3
>
^
8
PlayList
LogoLvl: 80
Exit
1
Logo
Position
7
8
9
GET LOGO
Show Exit
1
+
HV Position
Select Logo
-Exit0
Show
H: 25
1
Logo:
0
V: 40
test_001
8
+
>
4
5
6
^
Show
Show
Select Step
Step:
7
8
4
5
Logo
Position
Exit
0
+
Exit
1
1
Get Logo Edit Position
Hor. Pos
Hor.Pos: Step
25
1
PlayList
Exit
1
Ins
Step
0
Del
Step
9
2
p
0
PlayList
6
+
Step:
0
5
9
4
5
9
3
4
5
- 6
0
+
1
2
Logo: 0
test_001
dit
HoldTime
o
1
5
2
Step:
0
7
8
9
4
5
6
6
Hor. Pos
0
3
1
2
3
Edit Position
Anim
+
Exit
0
Wiz
Hor.Pos:
25
1
+
0 Ver.Pos
+
Exit
Del Edit Position 1
StepHor. Pos 40
7
8
Step:
0
Ver.Pos:
40
25
5
9
6
Ver.Pos
Exit
1
Exit
1
7
8
4
5
1
2
1Logo
2
9
3
-
+
0
Del
LogoLvl:
80
Step
4
Show
Select Logo
Logo: 0
test_001
6
HoldTime
00:00.00
3
7
8
4
5
1
2
9
Exit
6
1
8
5
Show
1
2
-
0
8
4
5
6
1
2
3
-
0
9
6
Exit
3 Step
1
Logo
4
Level
PlayList
5
6
1
2
3
Edit LogoLvl
+Select StepExit
0
LogoLvl: 80 1
Step: 0
5
4
-
Exit
^
<
Ins
Step
Show
PositionDel
Step
9
Ver.Pos:
40
6
Exit
Ho
V
6
3
7
3
2
0
8
+
9
Exit
6 Exit
1
1
4
+
5
PlayList1
2
3
Select Logo
-
0
+
-
0
+
H: 25
V: 40
9 Edit
5
1
Step
Edit HoldTime
9
1
2
00:00.00 Ver.Pos
Step:
1
• www.sams.rs
HV Positi
8
4
Show
Anim
Wiz
Hor.Pos: 25
7
+
Exit
Logo: 0
7
8
1
test_001 Hor.7 Pos8
25
Adjust
HV Pos.
Edit Position
Ver.Pos
9
40
7
3
Edit Position
Anim
Hor. Pos
0
+
Exit
0
+
Wiz
Ver.Pos:
25 elektronik
1
Sams
d.o.o. 40
• [email protected]
Ver.Pos
Show
0
+
Exit
1
1
Adjust
Edit LogoLvl
LogoLvl
Ins
LogoLvl:
80 Pos
Hor.
Step
Edit LogoLvl
7
3
4
3
Select Logo
20
Ins
Step
Select Step
Logo: 0
9
test_001
Logo
6
Position
HoldTime
2
Logo
8Position
9
Menu
7
-
00:00.00
6
2
+
8
Show
HoldTime
Press EXIT button to exit the menu. Press EXIT again to return to the main
screen.
1 9
0
4
Exit
1
Show
8
8
0
7
1
0
Select
Logo
001
7
Logo: 0
test_001
4
ime
.00
-
8
3
Select Step
7
3
Select Logo
Ver.Pos
Logo:
0
40
test_001
7
1
2
Gpi A
Close
^
Macro in the menu. In a new menu
Press GET LOGO button
Edit
4
5
6
Edit
Gpi B
>
Adjust
LogoGPI
an image. Adjust
You can <select picture
by
typing the
Open
HV Pos.
Level
LogoLvlkeypad or by pressing the
number in the numerical
plus
Get
1Logo
2
3
and minus. Displays the currently selected
will
Select Actio
Gpiimage
B
FadeIn
FadeIn
Gpi -A
0
HV+ Positi
Edit
Exit
Timebe
displayed above
the numeric
keypad Close
withExit
number
Show LogoLvl
Exit
Time
PlayList
Adjust
Logo Off
Open
1 the
1
H: 25
and name.
When
you find80the 1desired image, clickLogoLvl
LogoLvl:
V: 40
SHOW
button.
Currently
Active
macro
will
replace
with
Gpi
A
Logo
Adjust
Close
7
8
9
selected
image. SHOW button is no longer displayed.
Position
HV Pos.
^
7
8
9
The number at the
EXIT
button
that has so far flashed
4
5
6
Gpinot
B
Logo
on the
background
color,
flashing
inverted. If you do
<
4
5
6
Open
Level
want selected image, you can change the selection, but
1
2
3
1
2 is visible
3
this
time any change
both
in
Logo
Logo in program and
Gpi
B
FadeIn
0
+
PlayList
Position
Exit LOGO OFF).
Close
the Time
preview output (unless it is Level
pressed
9
<
Gpi A
Open
H: 25
V: 40
Logoselect
Level
^
7
HoldTim
00:00.0
H.Pos:
Adjust
V.Pos:
HVSelect
Pos. Action
test_001
LogoLvl:
LogoPlayList
Off
^
go:
0
est_001
HV Position
Edit LogoLvl
H: 25
V: 40
Adjust
Edit
LogoLvl
test_001
GPI
Adjust
HV Pos.
^
HV Position
ect Logo
Macro
Edit
^
et Logo
Exit
1 Logo
Get
test_001
0
Select
Logo: Step
0
test_001
Step: 0
VIN
Ins
Step
Exit
Ho
Ho
test_001
elektronik
HoldTime
00:00.00
H.Pos: 25
V.Pos: 40
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
Inserters
test_001
test_001
Menu
test_001
Inserter
test_001
Status
test_001
LogoLvl: 80
PGM Ok
Ref Ok
Step:
0
test_001
Logo:
0
Menu
test_001
test_001
HoldTime
test_001
00:00.00
H.Pos: 25 Get Logo
V.Pos: 40
Menu
LogoLvl: 80
1
Adjust
Macro
Edit
Dig
S
SD
Re
Ste
Log
te
Ho
00
H.P
V.P
Logo
Get Logo
Adjust
LogoLvl
LogoLvl
Since the active macro is changed, returnInserter
to the main screen. Previous active macro will not be marked.
Adjust
Edit
Adjust
test_001on theStatus
test_001
Inverted number is now displayed
main screen
showing the previously active
HV Pos.
GPI macro. You can HV Pos.
PGM Ok
activate any other macro than that was previously
active.
Ref Ok
test_001
Step:
0
Logo:
0
test_001
test_001
test_001
HoldTime
00:00.00
H.Pos: 25
V.Pos: 40
test_001
ADJUST LOGO LEVEL
Adjust
Get Logo
LogoLvl
test_001
Menu
LogoLvl: 80
LogoLvl:
80
Logo:
0
test_001
0
7
8
9
4
5
6
Exit
1
Show Show
7
87
98
4
54
1
21
32
3
-
0-
+0
+
HV Po
PlayList
H:LogoLvl:
25
80
V: 40
Menu
9
Macro
Edit
Get
Logo
65
6
Adjust
LogoLvl
Macro
Ad
Edit
HV
Adjust
Adjust
HV Pos.
LogoLvl
HV Position
Edit LogoLvl
Edit LogoLvl
Select Logo
H. Phase
Exit
1
^7
8
4
>5
1
2
-
0
<
^
Show Show
Exit Exit
1
1
7
8
9
4
5
6
1
2
3
-
0
+
V: 40
Inserter
8
9
Status
^
PGM Ok
4
5
6
HoldTime
Ref Ok
<
>
00:00.00
Step:
0
test_0011
2
3
Logo:
0
Anim
test_001
0
+
Wiz
HoldTime
Show
test_001
00:00.00
H.Pos: 25
Select
Logo 40
V.Pos:
test_001
Step:
0
LogoLvl:
80
Logo:
0
test_001
Logo: 0
test_001
7
test_001
Exit
1
0/
6
CVBS
0
Logo
Level
+
7
8
Exit Exit
1
1
Ver.Pos
Logo: 0
Logo
40 test_001
7
Position
test_001
4
HoldTime
Logo00:00.00
Level
1
Menu
<
3
Select
input
Del
Step
test_001
Exit
Exit
1
test_001
1
H:
V:
Logo
Position
SC Phase
9
FadeIn
Time Show
9
4
5
6
Adjust
Edit
Inserter
HV Pos.
GPI
CVBS&Y/C
1
2
3
1
2
3
test_001
test_001
Press
ADJUST LOGO LVL button
in the menu.Status
In a new menu
select the level of transparency.
Choose
PGM Ok
Select
by
typing the number in the numerical
keypad or
by pressing the
plus and minus.
0 transparency
+
0 Currently
+
Exit
Exit
Ref Ok
outpit
1 When you have selected the desired
selected transparency will be displayed
above
the
numeric
keypad.
Step:
0
test_001
test_001
Logo: will0replace with new selected in active macro. SHOW
transparency, click the Show button. Transparency
test_001
Logo
button is no longer displayed. If you do not like
it, you can change it, but this time any change
is visible
Macro
PlayList
PlayList
Position
HoldTime
test_001
test_001
Adjust
both in program and in the preview
output
(unless
it is pressed
LOGO OFF).
Adjust
Edit
00:00.00
HV Pos.
LogoLvl
H.Pos: 25
V.Pos:
Select
Step 40
Edit Position
Select Step
test_001
Ins Menu
HV Position
Edit LogoLvl
Hor.screen.
Pos
Step
LogoLvl:
Press EXIT button to exit theStep
menu. Press
EXIT
again80
to return
to
the
main
Step:
0
Hor.Pos:
Step:
25
0
1
Step
PlayList
H: 25
LogoLvl: 80
^
ow
DigiVIN-1
Status
SDI Ok
Ref Ok
Step:
0
Logo:
0
test_001
test_001
Anim
FadeIn
Wiz
Time
-
8 7
9 8
9
5 4
6 5
6
2 1
3 2
3
0 -
+ 0
+
Exit
Ins
Step
Del
Step
Exit Exit
Exit 1
1
Select Logo
Edit Position
Hor. Pos
Step: 0
Logo:
0
Ver.Pos:
40
25
test_001
Logo
Ver.PosLogo
Since the active macro partially
changed,
when
button
will be
7
8
9return to the first page, active macro
9
7
8 7
9 8
Menu
marked. The number in lower-right corner is now not present on
the
main
page.
Logo
PlayList HoldTime
00:00.00
H. Phase
0
VIN
7
4
8
5
Anim
Wiz
9
6
Get Logo
4
1
-
5
2
0
6
3
+
Position
Macro
Edit
Exit
1
4
HoldTime
00:00.00
1
CVBS
Anim
Wiz
Select
input
Adjust
LogoLvl
Sams elektronik
d.o.o.
• [email protected] • www.sams.rs
Edit
HoldTime
Step:Adjust
0
Step: 0
Edit
Min
HoldTime
HV Pos. 00:00.00
GPI
CVBS&Y/C
5 4
2 1
6 5
6
SC Phase
3 2
0/
3
0
0 -
+ 0
+
Exit Exit
1
1
7
8
9
21
Edit HoldTime
4
5
HoldTime
00:00.00
6
Min
Adjust
HV Pos.
Inserters
HV Position
Inserter
H: 25
Status
V: 40
PGM Ok
Ref Ok
Step:^
0
Logo:
0
<
test_001>
test_001
test_001
test_001
HoldTime
00:00.00
H.Pos: 25
V.Pos: 40
test_001
Show
test_001
Exit
test_001
1
LogoLvl: 80
test_001
Inserter
Status
PGM Ok
Ref Ok
Step:
0
Logo:
0
test_001
test_001
Menu
1
PlayList
Press ADJUST HV POS button in the menu. In a new
Macro
menu select the position
Edit of the inserted image. The
position can be selected by pressing the arrow keys.
Display of the currently selected position will be printed
above the arrow. Position will replace with new selected
Gpi A
PlayList
in active
macro.
Open
test_001
test_001
test_001
Logo
Position
Gpi A
Close
Logo
Level
Gpi B
Open
test_001
FadeIn
PressTime
EXIT
Exit EXIT
button to exit the menu. Press
1
return to the main screen.
Exit
Menu1
1
test_001
test_001Logo
Position
4
5
Menu
1
-
6
Exit
4
0
Edit
GPI
+
Get Logo Exit
1
1
Edit1
GPI
Exit
-
9
5
6
2
3
0
1
+
Gpi B
Open
Gpi B
Close
7
8
Logo
Level
0
+
4
5
^
6
PlayList
Edit
1 LogoLvl
2
3
-
0
Exit
1
7
0
8
+
PlayList
4
5
22 2
1
-
0
<
Frm
Logo
Exit
Show
Position
1
+
7
8
9
Logo
Sel.Final LogoLevel
4 Logo:
5
60
test_001 FadeIn
1
2
3
Exit
Time
1
-
H: 25
Macro
V: 40
Edit
Sec
9
LogoLvl: 80
dTime
00.00
-
Min
HoldTime
00:00.00
o: 0
t_001
o: 0
t_001
w
3
7
8
4
5
1
2
-
0
5
LogoLvl: 80
6
7
8
9
4
5
6
2
1
2
3
Exit
- 1
0
+
Exit
1
Exit Macro
1 Edit
MACRO EDIT
HV Position
0
0
2
ExitAdjust
1 Pos.
HV
Exit
1
Edit HoldTime
dTime
1
Logo Of
Edit LogoLvl
1
2
3
3
GPI
provides for the mixer (which has
this
option)
to
SC
Phase
control
the
display
of
inserted
images.
The
device
has
0
+
Show
Macro0
+
the
ability
toExit
control
with two GPI buttons. Control can
Edit
CVBS
1 0/ 0
be defined when the key is turned on or off. In this
Select Action
way,Select
the device allows the execution of four commands
Edit Position
8
9
Logo Off
Pressinput
the desired7 option
and
then you can choose the
Hor. Pos
Ver.Pos: 40
25
configuration by 4typing
the
number in the numerical
5
6
Edit
keypad or by pressing the plus and minus. Options
GPI
CVBS&Y/C
7
8
9
include:
Logo OFF,
Macro
and position the image
Ver.Pos
1 select
2
3
7
8
9
in the
program, select one of stored images or no
Select
4
5
6
0
+
Exit
Exit
outpit
4
5
6
function.
1
3
8
4
Menu
2
Gpi A
Select Logo Adjust
LogoLvl
Open
Logo: 0
test_001 Adjust
Macro
Gpi A
Edit
HV
Pos.
Close
7
dTime
00.00
EDIT GPI
9
6
OK
PlayList
This
configures the selected macro. Under this option,
there are settings: Edit
GPI
Logo
FadeIn Position
PLAY LIST - configuring animation
Time
Select
Action
LOGOGpi
POSITION
- Configuration
position
A
Logo
Logo Off
LOGO
LEVEL
configure
transparency
Open
Level
Edit FadeIn
Exit
1
4
5
-
0
Logo
Position
6
3
+
Gpi B
Close
7
8
9
4
5
6
1
2
3
-
0
+
Exit
Exit
1
Exit
1
Sams elektronik d.o.o. • [email protected] • www.sams.rs
Exit
on the screen
FADE IN TIME - Configure the appearance of the image
FadeIn: 5.0s
A
in FadeIn
theGpi
program
Close
Exit
Time
1
7
8
9
Gpi B
Open
Exit
1
2
1
3
+
>
^
0
8
Select Act
Logo
Level
HoldTime
test_001
00:00.00
Edit Position
InsH.Pos: 25
Hor. Pos
0
Hor.Pos: 25
Step
V.Pos: 40
test_001
Menu
LogoLvl: 80
Ver.Pos
Del
40
Step
9
7
8
9
Step:
test_001
Gpi B
Close
again
to
Edit
GPI
Since the active macro partially changed, when return to
the first page, active macro button will be marked. The
number in lower-right corner is now not present on the
main page.
test_001
test_001
Select Step
ogo
p:
Exit
1
Adjust
HV Pos.
dTime
00.00
p:
elektronik
ADJUST HV POSITION
o: 0
t_001
7
test_001
p:
Edit
GPI
^
tep
Adjust
LogoLvl
VIN
2
<
3
HV Position
Edit LogoLvl
Show
Exit
1
-
0
+
7
8
4
PLAY LIST
5
6
1
2
3
LogoLvl: 80
Step
Exit
1
H: 25
V: 40
Logo: 0
test_001
elektronik
-
0
Logo
1
Level
HV Pos.>
^
9
<
>
PlayList
Exit
1
+
Select Step
Step
Step:
Logo: 0
test_001
HoldTime
00:00.00
7
8
0
9
Ins
Step
Logo
7
8
Position
Del
Step
1
Show
Ins
Step
Hor. Pos
Del
Step
Ver.Pos
40
2
Logo: 0
Edit PositionSelect Logo
test_001
7
8
9
Step:
0 25
Hor.Pos:
Logo: 0
4test_001
5
6
HoldTime
00:00.00
Logo
1
2
3
7
8
9
7
8
2
3
-
0
Step:
+
0
1
Ins
Exit
Step1
Hor. Pos
2
Ver.Pos
Inserters
40
3
Ins
Exit
Step
1
Del
Step
4
0
5
+
6
1
2
3
Edit PositionSelect Logo
Anim
00
+
Exit
0
+
Step:
Hor.Pos:
25 -Logo:
Wiz
0
1
test_001
8
9
7
8
Ver.Pos
Edit LogoL
E
40
Hor.
Pos
LogoLvl:
8
V
25
Exit
1
4
1
Show
Exit
1
Logo: 0
Ver.Pos
Del
Logo
Select Logo
Edit
Position
Edit HoldTime
test_001
40
Step
7
8
9
7
8
9 7
8
9
Hor.
Pos Editing
Step:of 0
Creation
animation
works
as
a
small
non-linear
editing.
is
made
by selecting an image
Step:
0
Min and
Logo: 0
Ver.Pos: 40 HoldTime
25
their
duration within
4test_001
5 the6 animation.
4
5
6 400:00.00
5
6
HoldTime
HoldTime
00:00.00
00:00.00
Logo: 0
1
2
1
Sec
Ver.Pos
STEP -Logo
defining step
in82 the 93animation. The maximum
numbertest_001
of1 steps
is 3230.
If2 the 3animation is
set to
7
7
E
Logo
Hor.
Pos
ExitLevel
H
1
7
8
Ver.Pos
9
00:00.00
1
Anim
Step:
Wiz
7
8
9
4
0
5
+
6
1
2
3
Exit
Frm 1
test_001
Anim
0
Wiz
HoldTime
Exit
Min
1
Anim
Step:
Wiz
Edit HoldTime
0
Logo: 0
test_001
Step: 0
HoldTime
Logo: 0
test_001
Anim
Wiz
HoldTime
-
0
+
HoldTime
00:00.00
Sel.Final Logo
Sec
Logo: 0
4test_001
5
6
OK
7
8
9
1
7
2
8
3
9
4
0
5
+
6
1
2
3
00:00.00
Anim
HOLD
TIME0Step:
Wiz
Exit
1
7
8
4
0
5
1
2
00:00.00
9
+
Exit
6
1
Exit
1
3
-
0
+
Logo: 0
test_001
7
8
9
4
5
6
1
2
3
-
0
+
Logo: 0
test_001
Exit
OK
1
Exit
1
Sel.Final Logo
hold
of+ STEP. After
- time
0
Exit
OKselecting step and image, you must adjust time. Time is set
Logo: 0
1
independently test_001
for minutes, seconds and
frames by pressing the appropriate buttons that define
them.
The
minimum
hold
time
is
one
frame
and maximum is 40 minutes. You can choose to type in
Logo: 0
atest_001
number in the
numerical
keypad or by pressing the plus and minus.
7
8
9
ANIM WIZ - determines the final frame of the animation. You can choose to type in a number in the
4
5 by 6pressing the plus and minus. All settings of the STEP 0 will be included for
numerical
or
HoldTime keypad
00:00.00
the
other images
in
order.
All that is behind the final frame is defined with a time 00:00.00, which the
1
2
3
device recognizes as the end of the animation, and start from the beginning. Once defined the last
Anim
image
in the animation,
button.
0
+press the OK
Exit
Wiz
1
VIN
Sams elektronik d.o.o. • [email protected] • www.sams.rs
9
6
3
9
4
5
6
1
2
3
-
0
+
9
0
Anim
Wiz
2
Ver.Pos
7
8
Sel.Final Logo
HoldTime
00:00.00
Frm
+
Logo
5
Level
Edit LogoLE
0
+
Hor.
Pos
LogoLvl:
8V
25
Anim
25
frames per -second,
it+ seems that
the overall animationAnim
of- 2290 images
can
last
9.2 seconds.
The
Show
0
+ Exit
Exit
0
+
Exit
Wiz
Wiz
4
5
6
4
6 4
5
6
HoldTime
animation
starts
from
STEP
0 (zero) and
that
is5defined
with
a time
The
1 ends with a stepHoldTime
100:00.00.
Frm 1
00:00.00
maximum
duration
of
one
step
is
40
minutes.
If
the
STEP
0
defined
time
00:00.00,
this
means
that
1
2
3
1
2
3 1
2
3
there
is no animation
or logo is static. You can choose to type
a number
in the numerical keypad
Select Logo
Edit HoldTime
Edit in
Position
Anim
Anim
Hor. Pos Step:
-the plus
0
+
Exit
Step:
0
00
+ Exit
0
+
Exit
or
by pressing
Min
Wiz
Logo: 0and minus.
Wiz
Ver.Pos: 40 HoldTime
25
1
If you make a mistake
during the configuration,
you can correct it by pressing
the button:1 Ins Step - 1add
test_001
00:00.00
step in front of that is currently displayed; Step Del - deletes
the currently
displayed step.
Logo:
0
Logo
HoldTime
Sec
Sel.Final
Logo
test_001
7
8 insert
9
NOTE: Take careEdit
when
or delete step. EachVer.Pos
time when
button
8 the
9 command will be
7
8 is pressed,
9 7
Step: 0
Min
Step: 0
OK
HoldTime
Logo:
0
executed without any indication.
400:00.00
5
6
5
6
4
5
6 4test_001
HoldTime
LOGO
- defines what
image
will be within the selected STEP. After
selecting
step,
press
the
button
LOGO.
Frm
HoldTime
00:00.00
Logo:
0
Logo:
0 pressing the plus and minus.
You
can
choose
to
type
in
a
number
in
the
numerical
keypad
or
by
Sec
1
2
3
2
3
1
2
3 1
test_001
Anim
Wiz
HoldTime
H
3
Select Step
FadeIn
0
+
Time
Step:
0
Anim Logo
Position
Wiz
4
5
6
HoldTime
PlayList
5
6
9
E
Hor.
ExitPos
1
4
Anim Logo
Step
Position
Exit
Wiz
1
4
Select Step
Anim
Step
Wiz
Select Step
FadeIn
Time 0
PlayList
Step:
PlayList
5
6
Logo
Level
HoldTime
00:00.00
^
Show
1
Exit
1
6
^
Show
Show
4
5
LogoLvl
23
<
^
Select Step
FadeIn
Step:
Time 0
Step
Exit
1
Show
Logo: 0
test_001
Inserters
HoldTime
LOGO POSITION
00:00.00
Anim Logo
Wiz
Position
Ins
Step
Macro
EditHor. Pos
Ver.Pos
40
Del
Step
7
8
9
4
5
6
1
2
3
-
Logo
7
8
9
4
5
HoldTime
00:00.00
Logo
osition
1
Gpi A
Close
Gpi B
Open
Gpi B
Close
Del
Step
7
6
4
2
3
1
0
+
-
Gpi8 A
Open
5
Gpi A
2
Close
0
Gpi B
Open
Ver.Pos
40
Logo
Level
Exit
1
+
9
Hor.
ExitPos
1
Edit Position
Gpi B
Hor.Pos:
Close 25
7
8
9
4
5
6
1
2
3
-
0
+
4
5
6
1
2
3
-
0
+
Select Action
Ver.Pos
7
8
Exit
1
elektronik
Exit
1
Edit LogoLvl
Edit Position
Hor. Pos
LogoLvl: 80
Ver.Pos: 40
25
Edit
GPI
E
FadeIn
Show
Time
Edit Fade
FadeIn: 5.
9 7
8
9
7
8
Logo Off
6
3
7
8
+
Exit
4
1
5
1
2
4
5
6 4
5
6
4
5
1
2
3 1
2
3
1
2
-
0
+ -
0
Exit
+
1
-
0
9
Show
Exit
6
1
Exit
1
3
Edit HoldTime
Edit Position
Gpi B
Hor.
Pos Step:
Before
entering
this menu,
press
corner on- the 0remote
control Exit
that you want to define. Then enter the
0
+
Min
Exit
Close
Ver.Pos: 40 HoldTime
25
menu. Horizontal / vertical
position,
you
can
choose
by
typing
the 1number in the numerical keypad or
1
00:00.00
FadeIn
Time
Gpi A
Open
Anim
Wiz
Exit
1
0
Ins
Step
Edit PositionSelect Logo
Step: 0
Hor.Pos: 25 Logo: 0
test_001
layList
Logo
Level
Gpi B
Open
Logo
Level
>
by pressing theLogo:
plus and
0 minus. After defining the position, press the EXIT button. Press the next corner
and Ver.Pos
repeat the test_001
operation
as
the previous
one. Sec
8
9
7
8
9 7
LOGO LEVEL
HoldTime
Edit
GPI
Exit
1
Select Action
Logo Off
Frm
7
8
9
4
5
6
1
2
3
-
0
+
Exit
Exit
11
OK
5
6
4
5
6
1
2
3
1
2
3
+
-
0
Anim Logo
0
Wiz
Level
Frm
+
Exit
1
Edit LogoLvl
Sel.Final Logo
Step:
0 80
LogoLvl:
Logo: 0
test_001
Min
Sec
4
Logo: 0
7
8
test_001
4
Show
5
HoldTime
00:00.00
1
2
Exit
1
Anim
-
Wiz
0
9
6
3
+
7
8
9
4
5
6
1
2
3
-
0
Exit
+
1
FadeIn: 5.0s
24
8
9
4
5
6
1
2
3
-
0
+
Exit
1
Press the FADE IN TIME button in the menu. A new
menu set time of appearance of a logo through fade in
effect. You can choose time by typing the number in the
numerical keypad or by pressing the plus and minus.
Displays the currently selected time will be displayed
above the numeric keypad. The value is entered in
seconds. Shortest time for this effect is 0.1 and longest
25.5 seconds. After defining press the EXIT button.
Edit FadeIn
Exit
1
Exit
1
7
FADE IN TIME
FadeIn
Time
Exit
Exit
11
Press LOGO LEVEL button in the menu. In a new menu
FadeIn
select
Exit the level of transparency. Choose transparency
Time
1
by typing
the number
in the numerical keypad or by
pressing the plus and minus. Display of current selected
FadeIn above the numeric keypad.
transparency willEdit
be displayed
FadeIn:
When
the desired transparency, click
OK you have selected5.0s
the Show button. After defining transparency press the
EXIT button.
7
8
9
4
5
6
1
2
3
-
0
+
Exit
1
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN
test_001
DigiVIN-1
Status
SDI Ok
Ref Ok
Step:
0
Logo:
0
test_001
HoldTime
00:00.00
H.Pos: 25
V.Pos: 40
test_001
test_001
test_001
test_001
test_001
test_001
elektronik
test_001
Menu
test_001
1
test_001
test_001
HoldTime
Menu
00:00.00
1
H.Pos: 25
V.Pos: 40
test_001
test_001
test_001
test_001
test_001
test_001
ADVANCED
SETTINGS
LogoLvl: 80
DigiVIN-1
Status
test_001
SDI Ok
Ref Ok
Step:
0
test_001
Logo:
0
test_001
test_001
PGM Ok
PGM
Ref Ok
Ok
Ref Ok
Step:
0
Step:
0
Logo:
0
Logo:
test_0010
test_001
HoldTime
HoldTime
00:00.00
00:00.00
H.Pos: 25
H.Pos:
V.Pos: 25
40
V.Pos: 40
LogoLvl: 80
LogoLvl: 80
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
test_001
LogoLvl: 80
Inserter
Inserter
Status
Status
PGM Ok
PGM
Ref Ok
Ok
Ref Ok
Step:
0
Step:
0
Logo:
0
Logo:
test_0010
test_001
HoldTime
HoldTime
00:00.00
00:00.00
H.Pos:
25
H.Pos:
V.Pos: 25
40
V.Pos: 40
LogoLvl: 80
LogoLvl: 80
test_001
test_001
test_001
Menu
test_001
Menu
Menu
Inserters
Menu
Menu 1
1
test_001
test_001
test_001
test_001
test_001
test_001
Menu
Menu
Inserter
Status
PGM Ok
Ref Ok
Step:
0
Logo:
0
test_001
test_001
LOCK
test_001
HoldTime
00:00.00
H.Pos: 25
V.Pos: 40
test_001
LogoLvl: 80
Menu
ON
POSITION
LOGO
OFF
Press
MENU button.
Menu
test_001
Get Logo
Get Logo
www.sams.rs
Inserter
Status
PGM Ok
Ref Ok
Step:
0
Logo:
0
test_001
test_001
test_001
Menu
Adjust
Adjust
LogoLvl
Macro
LogoLvl
Edit
Adjust
Adjust
HV
Pos.
HV Pos.
test_001
HoldTime
00:00.00
H.Pos: 25
V.Pos: 40
test_001
test_001
Exit
Exit
Macro
Edit
Select
input
4
Select
outpit
l
p
t
1
os
os
^
s
p
Exit
>
Exit
1
1
<
<
Exit
1
Hor. Pos
Ver.Pos
40
Logo
Position
Edit Position
Hor.Pos: 25
VIN
Hor. Pos
Exit 25
>
>
<
0
Logo
Position
Show
Show
>
Edit
test_001
Edit
GPI
GPI
Menu
Macro
EditHP
F
Exit
Exit
Exit1
1
Logo
Macro
Level
Edit
H. Phase
FadeIn
Time
0
Exit
1
CVBS
PlayList
Select
HP
input
Logo
PlayListPosition
PlayList
Exit
6
^
^
PlayList
1
2
3
SC
F
5
ON
8
9
4
5
6
2
3
0
>
7
8
5
1
Gpi
A
Close
2
3
-
0
7
+
Gpi B
Open
1
Edit Position
Gpi B
Ver.Pos: 40
Close
4
9
9
4
4
5
5
6
6
1
1
2
2
3
3
-
0
0
+
+
Exit
Exit
Macro
Macro
H.Edit
Phase
Edit
0
Open
Edit
GPI
Gpi
B
Framing
Close
Select Action
0
Exit
Off
8
9
5
6
0
8
8
Framing
SC
Exit
1
1
2
-
0
7
8
4
5
1
2
<
0
3
Exit
+
SC
Show
Edit LogoLvl
LogoLvl: 80
7
8
9
4
5
6
1
2
3
-
0
+
FadeIn: 5.0s
FadeIn
Time
Exit
1
Sams
elektronik d.o.o. • [email protected] • www.sams.rs
3
+
0
1
1
CVBS
ThisGpi
menu
A is used to adjust the horizontal phase of the
LogoinOff
Open
output
video signal
relation to external reference.
Select
The horizontal
phase
moves
from 0-127.
HP
HP
input
7
8
9
Logo During
Gpi the
A
change in value, it may cause short-term
Logo
Position
Close
7
8
9
4 in 5
6
Position image disturbance
monitor
due to the transition to a
F
F
newCVBS&Y/C
time.
4
5
6
Gpi B
1
2
3
Select
anLogo
option by pressing the left / right (</>)
Open
FadeIn
Select
1
2
3
button.
Time
Level
<
0
>
Exit
Exit
outpit
To Gpi
save,B after adjusting
in this and
two other offered
0
+
Exit
Exit
Close
menus,
the EXIT button. Only then
settingsEdit
are FadeIn
1
Editpress
LogoLvl
1
saved.
Logo
Level
2
LOGO OFF
Select
Select
outpit
outpit
H PHASE
9
Select
Action
6Logo
CVBS&Y/C
CVBS&Y/C
POSITION
7
7
LogoLvl: 80
Hor.Pos: 25 Edit
GPI
Gpi A
Open
4
reverse combination does not work).
CVBS is used to adjust the Subcarrier Phase ofCVBS
This menu
the
output video signal.
Edit
Select
Select
PlayList
Left
is
one of 2567 (0-255)
values
that
on
GPI can
HP be entered
input
input
8
9
PlayList
the keypad.
RightLogo
number represents
the
degreeAction
of phase rounded
4
5
6
Select
Logo
F
Position
toPosition
whole
number. Gpi A
CVBS&Y/C
CVBS&Y/C
Logo Off
1 Open
2
3
Select an option by pressing the left / right (</>)
Logo
Select
Select
button.
Logo
< Gpi0 A
>
Exit
Level
outpit
outpit
To Level
save, after adjusting
in
this
and
two
other
offered
Close
7
8
9
menus,
press the EXIT button. Only then settings are
FadeIn
FadeIn
Time
4
5Exit6
Gpi B
saved.
Exit
Time
SC
7
CVBS&Y/C
Logo
1
Logo
Level
Select
Position
<
outpit
FadeIn
Time
Edit Position
CVBS
CVBS
Select
Select
input
input
test_001
SC
HV Position
HV Position
H: 25
7
8
9
H:
V: 25
40
V: 40
CVBS&Y/C
SC Phaseyou enter the menu, press
When
SC Phase
the
ON plus LOCK button (in
0/ LOGO
0
0/ 0
SC PHASE
Adjust
SC Phase
Adjust
HV
Pos.
HV Pos.
0/ 0
^
<
LOCK
test_001
^
^
Edit
HV Position
GPI
H: 25
V: 40
Exit
1
Macro
Macro
Edit
Edit
Exit
Exit1
1
CVBS
Adjust
HV Pos.
LogoLvl: 80
Edit
GPI
Exit
1
VIN-11R
Remote control panel for inserters
test_001
Exit
7
8
9
7
8
9
4
5
6
1
2
3
-
0
+
Edit FadeIn
FadeIn: 5.0s
7
8
9
25
Inserters
elektronik
FRAMING
Framing
SC
CVBS
Select
input
HP
F
CVBS&Y/C
Select
outpit
Exit
SC
0
7
8
9
4
5
6
1
2
3
<
0
>
HP
F
Exit
This menu is used to set the color framing.
Due to the different length cables for external references,
it is sometimes necessary to change the PAL sequence
start. Color framing in a given field work only when
connected to an external reference.
The factory default setting is 0.
It can be adjusted by selecting one of the two fields by
selecting 0 or 1.
Select an option by pressing the left / right (</>)
button.
To save, after adjusting in this and two other offered
menus, press the EXIT button. Only then settings are
saved.
SOFTWARE SUPPORT
Building 1
PC
TCP IP
Building 2
INTERNET
Inserter
TCP IP
The device supports the development of specific software for customer needs, whether it’s a macro
or remote configuration of software for playout systems, sending specific commands to the device IP
address.
Exit
1
Commands are sent in the format:
http://[IP_device_address]/get_data?[command]
FadeIn
Time
For each command is entered a value:
[command=value]
LIST
Edit FadeIn
OF COMMANDS:
FadeIn: 5.0s
7
8
4
5
1
2
-
0
26
ip_addr - changes ip address. Enter it in the form aaa.aaa.aaa.aaa,mmm.mmm.mmm.mmm,ggg.ggg.
ggg.ggg (aaa - ip address, mmm - mask, ggg - geteway)
h_offset
- horizontal phase shift. Enter from 0-127, where the increase in the value is 37ns.
9
sc_phase - sc phase shift. Enter from 0-255, where the increase in the value is 1.41 degree.
6
src_type
- select the type of the input signal. The values are: 1 - cvbs, 2 - yc, 3 - yuv, 4 - beta.
dst_type
- select the type of the output signal. The values are: 0 - cvbs&yc, 2 - yuv, 3 - beta, 4 - rgb.
3
pl_hvpos - adjusting the position of all 4 corners of the currently active macro. Enter in the form: x1/
+
Exit
y1,x2/y2,x3/y3,x4/y4.
(x=0-431, y=0-624)
pl_lvl - level of1transparency of the currently active macro. The values are from 0-100.
pl_step - defines a step in the animation of currently active macros. Enter in the form: step,logo,mm:ss:ff.
(step=0-229, logo=0-228, mm=0-42, ss=0-59, ff=0-24)
pl_fade - Time for FADE IN effect in the current active macro. The values are from 0-255.
pl_flash - save into memory all commands under certain macro. The values are from of 0-6.
pls - macro select. The value of this command must be the same with the value of pl_flash. The values
are from od 0-6.
pos - corner select. The values are from 0-3.
lon - logo on/off. on=1; off=0.
hpos - temporary horizontal position.
vpos - temporary vertical position.
trn - temporary transparency.
lnum - temporary image selection.
pgm - check the presence of the program signal. This command gets the return value 1 or 0, where
1 - signal OK and 0 - signal ERROR.
ref - check the presence of the reference signal. This command gets the return value 1 or 0, where 1
- signal OK and 0 - signal ERROR.
gpi_a_open - set the GPI
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN
Inserters
elektronik
gpi_a_close - set the GPI
gpi_b_open - set the GPI
gpi_b_close - set the GPI
Values for GPI, from 0-229:
0 - 199 - stop macro and show image with that number
200 - macro 0, up-left
201 - macro 1, up-left
202 - macro 2, up-left
203 - macro 3, up-left
204 - macro 4, up-left
205 - macro 5, up-left
206 - macro 6, up-left
207 - macro 0, up-right
208 - macro 1, up-right
209 - macro 2, up-right
210 - macro 3, up-right
211 - macro 4, up-right
212 - macro 5, up-right
213 - macro 6, up-right
214 - macro 0, down-left
215 - macro 1, down-left
216 - macro 2, down-left
217 - macro 3, down-left
218 - macro 4, down-left
219 - macro 5, down-left
220 - macro 6, down-left
221 - macro 0, down-right
222 - macro 1, down-right
223 - macro 2, down-right
224 - macro 3, down-right
225 - macro 4, down-right
226 - macro 5, down-right
227 - macro 6, down-right
228 - logo off
229 - desable GPI (no function)
EXAMPLE:
http://[ip_address]/get_data?pl_step=5,17,00:00:15
This means: in the currently active macro, on step 5, add image 17, that will be present 15 frames
The procedure for programming animations:
1. pls - choose a macro in which will be programmed animation.
2. pl_step - add steps for animation. If the animation, for example, in 10 steps, ten times must
be added command for each step. Note: If animation is in loop, last step must be the in time format
00:00:00.
3. pl_flash - save animation in memory.
NOTE:
- If you use a web browser for programming inserters, we recommend that it be Mozilla Firefox®, with
desabled options to cache the page.
- It is not recommended to use Internet Explorer™, due to some errors in the understanding of the
application (problem with sending command in address bar, must press F5 - refresh to send)
- AFTER SAVING (COMMAND PL_FLASH) FOR THE SELECTED MACRO, PLEASE CHANGE TO ANY
MACRO AND RETURNED TO THE SAVED IN ORDER TO INITIALIZE SETUP.
VIN
Sams elektronik d.o.o. • [email protected] • www.sams.rs
27
Inserters
elektronik
PROBLEMS AND SOLUTIONS IN A NETWORK ENVIRONMENT
If the software NETFINDER is not able to locate the device in the network try the following:
1. Right click on Local Area Connection
2. Select option “Change Windows Firewall settings”
3. When a window “Windows Firewall” opens select tab “Exceptions”
4. Click on button “Add program”
28
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN
Inserters
elektronik
5. Click button “Browse”.
6. Select application NETFINDER.
8. Click “Open”, and “OK”. “OK” and “OK”
If the above solution does not help, try the following:
1. Download from address “http://www.softcab.com/dhcp-server/index.php” Tiny DHCP server*.
2. Before installation, note down the MAC address of the device.
3. Turn off the UTP cable, and if your computer has another network access, BT, WiFi etc. - disable
them.
4. Network card on your computer set to a fixed address 192.168.0.1, subnet mask 255.255.255.0,
default gateway and DNS leave blank.
5. Turn off all kinds of firewalls completely.
6. Install Tiny DHCP server.
7. In Tray icon will appear in the form of two shaking hands.
8. Click on that icon.
9. In the opened window, click the button “Add new”.
10. Enter the MAC address of the device (MAC address is entered without dashes, dots and spaces) and
press OK.
11. If the field is not marked with the MAC address of the device, click on it.
12. In the right part of the window in the drop down menu instead of “Ask me” choose “Automaticallz
process the request”.
13. In the IP Address field enter 192.168.0.200 (can be some other IP)
14. Connect the UTP cable to the computer and the other side to the device.
15. Turn on device.
16. Wait the computer to show “10mb connected...”
VIN
Sams elektronik d.o.o. • [email protected] • www.sams.rs
29
Inserters
elektronik
17. If the “tray” icon of DHCP server has not changed its color when you turn the device, turn the unit
off, wait for a while and turn it on again.
18. Start application NETFINDER.
* Tiny DHCP server is free software, which is owned by the publisher SoftCab, Inc.
CABLE WIRING BETWEEN DEVICE AND REMOTE CONTROL
female 9P SUB D
male 9P SUB D
G
V+
V+
5 4 3 2 1
1 2 3 4 5
9 8 7 6
6 7 8 9
TX
G
RX
RX
TX
CABLE WIRING FOR CONNECTION TO PC
5 4 3 2 1
1 2 3 4 5
9 8 7 6
6 7 8 9
female 9P SUB D
male 9P SUB D
CABLE WIRING BETWEEN THE LOGO INSERTER AND DigiTIM-1
5 4 3 2 1
5 4 3 2 1
9 8 7 6
9 8 7 6
male 9P SUB D
male 9P SUB D
MASTER (ADVIN, DigiVIN-1)
SLAVE (DigiTIM-1)
GPI / TALLY PINOUT
GPI A push
button in a
mixer
GND GPI B GPI A TALLY A TALLY B
+
5V
–
GPI B push button
in a mixer
GPI A, GPI B - Setting the GPI button
TALLY A - LED is on when there is no incoming signal
TALLY B - LED is on when the logo is on
30
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN
Inserters
elektronik
NOTES
VIN
Sams elektronik d.o.o. • [email protected] • www.sams.rs
31
Inserters
32
elektronik
Sams elektronik d.o.o. • [email protected] • www.sams.rs
VIN