1
Download electrical modelling interface
Transcript
The Analogue Resistor Model - RESISTOR The resistor, like the current source, is a fundamental primitive. Temperature dependence is modelled by two parameters, used to define the first and second temperature coefficients, as in the following equation: Rt = R + A ⋅ ∆t + B ⋅ ∆t 2 where ∆t = t - 25 . The resistor model has the following properties: Property Default Description TC1 TC2 TEMP TNOM 0.0 0.0 27 27 The value A in the above expression The value B in the above expression Actual temperature of resistor. Temperature at which TC1, TC2 were measured.
