Download Documento MARCO PLAN 24
Transcript
10.4 Bottom event reporting bar This bar reports on automatic actions which take place. These are the automatic processes which are performed: Obtaining temperature log , produced by user request via the Automatic update of probe reading, performed automatically by the system every minute, with the updated values of all the probes of the registered devices. button on the action bar of the Slide Viewer. 10.5 Central work area This is where the application carries out all its functions. It is initially empty. The functions which may be displayed in this area are as follows: Slide Viewer, accessed by clicking on one of the device probes. The slide viewer will now appear automatically, displaying the general properties, the current probe readings and a graph showing the last 15 days' history of the selected probe. Graph Viewer, accessed by clicking the button located both on the Slide Viewer and on the main program menu. The difference between the two options is that the first searches for results starting from the selected device and the second allows graphs to be produced from probes on more than one device. Result Log Viewer, accessed by clicking the button located both on the Slide Viewer and on the main program menu. The difference between the two options is that the first searches for results starting from the selected device and the second allows graphs to be produced from more than one device. Alarm Log Viewer, accessed by clicking the button located both on the Slide Viewer and on the main program menu. The difference between the two options is that the first searches in the alarm log starting from the selected device and the second allows graphs to be produced from more than one device. Configuration of Registered Devices, accessed by clicking the button on the program's main menu. 21